NCV7718 Datasheet, PDF (1/27 Pages) ON Semiconductor – Hex Half-Bridge Driver

NCV7718
Hex Half-Bridge Driver
The NCV7718 is a Hex Half−Bridge Driver with protection features
designed specifically for automotive and industrial motion control
applications. The NCV7718 has independent controls and diagnostics.
The device can be operated in forward, reverse, brake, and high
impedance states. The drivers are controlled via a 16 bit SPI interface
and are daisy chain compatible.
Features
• Low Quiescent Current Sleep Mode
• High−Side and Low−Side Drivers Connected in a Half−Bridge
Configuration
• Integrated Freewheeling Protection (LS and HS)
• 0.55 A Peak Current
• R_DS(on) = 1 W (typ)
• 5 MHz SPI Control
• Compliance with 5 V and 3. 3 V Systems
• Undervoltage and Overvoltage Lockout
• Discriminated Fault Reporting
• Overcurrent Protection
• Overtemperature Protection
• Under Load Detection
• Daisy Chain Compatible with Multiple of 8 bit Devices
• 16−Bit Frame Detection
• These are Pb−Free Devices
Typical Applications
• Automotive
• Industrial
• DC Motor Management for HVAC Application
http://onsemi.com
MARKING
DIAGRAM
SSOP24 NB
CASE 506AL
NCV7718G
AWLYYWW
NCV7718 = Specific Device Code
A
= Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G
= Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 26 of this data sheet.
© Semiconductor Components Industries, LLC, 2012
1
September, 2012 − Rev. 0
Publication Order Number:
NCV7718/D