|
NCV7707 Datasheet, PDF (1/38 Pages) ON Semiconductor – Door-Module Driver-IC | |||
|
NCV7707
Door-Module Driver-IC
The NCV7707 is a powerful DriverâIC for automotive body control
systems. The IC is designed to control several loads in the front door
of a vehicle. The monolithic IC is able to control mirror functions like
mirror positioning, heating and folding including the electroâchromic
mirror feature. Besides two halfâbridge outputs to control lock and
safeâlock motors, the device features four highâside outputs to drive
LEDs or incandescent bulbs (up to 10 W). To allow maximum
flexibility, all lighting outputs can be PWM controlled thru PWM
inputs (external signal source) or by an internal programmable PWM
generator unit. The NCV7707 is controlled thru a 24 bit SPI interface
with inâframe response.
Features
⢠Operating Range from 5.5 V to 28 V
⢠Six HighâSide and Six LowâSide Drivers Connected as
HalfâBridges
⦠2x Halfâbridges Iload = 0.75 A; RDS(on) = 1.6 W @ 25°C
⦠2x HalfâBridges Iload = 3 A; RDS(on) = 300 mW @ 25°C
⦠2x HalfâBridges Iload = 6 A; RDS(on) = 150 mW @ 25°C
⢠Four HighâSide Lamp Drivers
⦠2x LED; Iload = 0.3 A; RDS(on) = 1.4 W @ 25°C
⦠2x 10 W; configurable as LED Driver; Iload = 2.5 A;
RDS(on) = 300 mW @ 25°C
⢠One HighâSide Driver for Mirror Heating; Iload = 6 A;
RDS(on) = 100 mW @ 25°C
⢠Electro Chromic Mirror Control
⦠1x 6âBit Selectable Output Voltage Controller
⦠1x LS for EC Control; Iload = 0.75 A; RDS(on) = 1.6 W @ 25°C
⢠Independent PWM Functionality for All Outputs
⢠Integrated Programmable PWM Generator Unit for All Lamp Driver
Outputs
⢠Programmable Softâstart Function to Drive Loads with Higher
Inrush Currents as Current Limitation Value
⢠Multiplex Current Sense Analog Output for Advanced Load
Monitoring
⢠Very Low Current Consumption in Standby Mode
⢠Charge Pump Output to Control an External Reverse Polarity
Protection MOSFET
⢠24âBit SPI Interface for Output Control and Diagnostic
⢠Protection Against Shortâcircuit, Overvoltage and Overâtemperature
⢠SSOP36âEP Power Package
⢠This is a PbâFree Device
Typical Applications
⢠Deâcentralized Door Electronic Systems
⢠Body Control Units (BCUs)
http://onsemi.com
SSOP36 EP
CASE 940AB
MARKING DIAGRAM
NCV7707
AWLYYWWG
A
= Assembly Location
WL = Wafer Lot
YY
= Year
WW = Work Week
G
= PbâFree Package
ORDERING INFORMATION
Device
Package
Shippingâ
NCV7707DQR2G SSOP36âEP 1500 / Tape &
(PbâFree)
Reel
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2014
1
May, 2014 â Rev. 2
Publication Order Number:
NCV7707/D
|
▷ |