|
NCV7608 Datasheet, PDF (1/27 Pages) ON Semiconductor – Octal Configurable Low/High Side Driver | |||
|
NCV7608
Octal Configurable
Low/High Side Driver
The NCV7608 integrates 8 output drivers configurable in any
combination of highâside, lowâside, or HâBridge configurations. The
integrated standard Serial Peripheral Interface (SPI) allows digital
control of all output stages and provides diagnostic fault information.
In addition, four channels (#5â8) can be PWM controlled via external
control input pins.
Integrated clamping circuits (both in high and lowâside operational
modes), waveshaping, positive and negative transient protection, and
dedicated channel pair overtemperature shutdown circuits provide for
a wide range of automotive and industrial applications.
Features
⢠Eight Independent Configurable Drivers
⢠RDS(on) = 1.2 W (typ @25°C)
⢠SPI Interface for Data Communication
⦠16 Bit Frame Length, Daisy Chain Compatible
⦠3.3 V/5 V Compatible
⦠Frame Detection
⢠PWM Inputs for 4 Outputs
⢠Ultraâlow Standby Current
⢠Over Current Protection
⦠Characterized to AEC Q10Xâ12âREV A
⢠HighâSide and LowâSide Flyback Protection
⢠Fault Repoting
⢠Undervoltage Lockout (VS and VCC)
⢠Overvoltage Shutdown (VS)
⢠Supports LED Loads
⢠Supports Cold Cranking Operation Down to 3 V
⢠Overtemperature Protection
⢠NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AECâQ100
Qualified and PPAP Capable
⢠These are PbâFree Devices
Typical Applications
⢠Automotive
⢠Industrial
⢠Relay Drive
⢠DC Motor Drive
⢠LED Drive
http://onsemi.com
MARKING
DIAGRAMs
SOICâ28
DW SUFFIX
CASE 751F
NCV7608
AWLYYWWG
SSOP36 EP
DQ SUFFIX
CASE 940AB
NCV7608
AWLYYWWG
G
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G or G = PbâFree Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 25 of this data sheet.
© Semiconductor Components Industries, LLC, 2013
1
June, 2013 â Rev. 3
Publication Order Number:
NCV7608/D
|
▷ |