|
NCV7462_1 Datasheet, PDF (1/56 Pages) ON Semiconductor – LIN/CAN SBC/System-IC | |||
|
NCV7462
LIN/CAN SBC/System-IC
The NCV7462 is a monolithic LIN/CAN SystemâBasisâChip with
enhanced feature set useful in Automotive Body Control systems.
Besides the bus interfaces the IC features two 5 V voltage regulators,
highâside and lowâside switches to control LEDâs and relays, and
supervision functionality like a window watchdog. This allows a
highly integrated solution by replacing external discrete components
while maintaining the system flexibility. As a consequence, the board
space and ECU weight can be minimized.
www.onsemi.com
Features
⢠Main Supply Functional Operating Range from 5 V to 28 V
SSOP36âEP
⢠Main Supply Parametrical Operating Range 6 V to 18 V
⢠CAN High Speed Transceiver Compliant to ISO11898
DQ SUFFIX
CASE 940AB
⢠TxD Timeâout on CAN
⢠LIN Physical Layer According to LIN 2.x and SAEJ2602
MARKING DIAGRAM
⢠Programmable TxD Timeâout on LIN
⢠Power Management Through Operating Modes: Normal, Standby,
Sleep and Flash
⢠Low Drop Voltage Regulator VR1: 5 V / 250 mA, ±2% Output
NCV7462â0
FAWLYYWWG
Tolerance
⢠Reverse Current Protected Low Drop Voltage Regulator VR2:
5 V / 50 mA, ±2% Output Tolerance
⢠3x Wakeâup Inputs, e.g. For Contact Monitoring
⢠Wakeâup Logic with Cyclic Contact Monitoring
⢠Wakeâup Source Recognition
⢠Independent PWM Functionality for All Outputs (integrated PWM
registers)
⢠Window Watchdog with Programmable Times
NCV7462â0 = Specific Device Code
F
= Fab Location
A
= Assembly Location
WL
= Wafer Lot
YY
= Year
WW
= Work Week
G
= PbâFree Package
⢠2x LowâSide Driver (typ. 3 W) with Overâload Protection and
Active Clamp; e.g. for Relays
⢠1x HighâSide Driver (typ. 1 W) with Overâ and Underâload
Detection and AutoâRecovery; e.g. for Bulbs, LEDâs and Switches
ORDERING INFORMATION
See detailed ordering and shipping information on page 54 of
this data sheet.
⢠1x HighâSide Driver (Selectable Between Typ. 2 W and 7 W) with
Overâ and Underâload Detection; e.g. for LEDâs and Switches
⢠3x HighâSide Driver (typ. 7 W) with Overâ and Underâload
Detection; e.g. for LEDâs and Switches
⢠2x Operational Amplifier for Current Sensing
⢠24âBit SPI Interface
⢠Protection Against Short Circuit, Overâvoltage and
Overâtemperature
Typical Applications like
⢠Deâcentralized Door Electronic Systems
⢠Body Control Units (BCUs)
⢠Climate Control Systems
⢠SSOP36âEP Package
⢠AECâQ100 Qualified and PPAP Capable
⢠These Devices are PbâFree, Halogen Free/BFR Free
and are RoHS Compliant
© Semiconductor Components Industries, LLC, 2016
1
June, 2016 â Rev. 5
Publication Order Number:
NCV7462/D
|
▷ |