NCV7380_07 Datasheet, PDF (1/14 Pages) ON Semiconductor – LIN Transceiver

NCV7380
LIN Transceiver
The NCV7380 is a physical layer device for a single wire data link
capable of operating in applications where high data rate is not
required and a lower data rate can achieve cost reductions in both the
physical media components and in the microprocessor which uses
the network. The NCV7380 is designed to work in systems
developed for LIN 1.3 or LIN 2.0. The IC furthermore can be used in
ISO9141 systems.
Because of the very low current consumption of the NCV7380 in
recessive state, it’s suitable for ECU applications with low standby
current requirements, whereby no sleep/wakeup control from the
microprocessor is necessary.
Features
• Operating Voltage V_S = 7.0 to 18 V
• Low Current Consumption of Typ. 24 mA
• LIN−Bus Transceiver:
♦ Slew Rate Control for Good EMC Behavior
♦ Fully Integrated Receiver Filter
♦ BUS Input Voltage −27 V to 40 V
♦ Integrated Termination Resistor for LIN Slave Nodes (30 kW)
♦ Baud Rate up to 20 kBaud
♦ Will Work in Systems Designed for either LIN 1.3 or LIN 2.0
• Compatible to ISO9141 Functions
• High EMI Immunity
• Bus Terminals Protect Against Short−Circuits and Transients in the
Automotive Environment
• Bus Pin High Impedance During Loss of Ground and Undervoltage
Conditions
• Thermal Overload Protection
• High Signal Symmetry for use in RC–Based Slave Nodes up to 2%
Clock Tolerance when Compared to the Master Node
• "1000 V ESD Protection, Charged Device Model
• NCV Prefix for Automotive and Other Applications Requiring Site
and Change Control
• Pb−Free Packages are Available
http://onsemi.com
8
1
SO−8
D SUFFIX
CASE 751
MARKING
DIAGRAM
8
V7380
ALYW
G
1
V7380 = Specific Device Code
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
G
= Pb−Free Package
PIN CONNECTIONS
RxD 1
NC 2
VCC 3
TxD 4
8 NC
7 VS
6 BUS
5 GND
(Top View)
ORDERING INFORMATION
Device
Package
Shipping^†
NCV7380D
SO−8
95 Units/Rail
NCV7380DG
SO−8
(Pb−Free)
95 Units/Rail
NCV7380DR2
SO−8 2500 Tape & Reel
NCV7380DR2G
SO−8
2500 Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2007
1
February, 2007 − Rev. 2
Publication Order Number:
NCV7380/D