NCV7351 Datasheet, PDF (1/12 Pages) ON Semiconductor – High Speed CAN Transceiver

NCV7351
High Speed CAN
Transceiver
The NCV7351 CAN transceiver is the interface between a
controller area network (CAN) protocol controller and the physical
bus and may be used in both 12 V and 24 V systems. The transceiver
provides differential transmit capability to the bus and differential
receive capability to the CAN controller.
The NCV7351 is an addition to the CAN high−speed transceiver
family complementing NCV734x CAN stand−alone transceivers and
previous generations such as AMIS42665, AMIS3066x, etc. Due to
the wide common−mode voltage range of the receiver inputs and other
design features, the NCV7351 is able to reach outstanding levels of
electromagnetic susceptibility (EMS). Similarly, extremely low
electromagnetic emission (EME) is achieved by the excellent
matching of the output signals.
KEY FEATURES
General
• Compatible with the ISO 11898−2 Standard
• High Speed (up to 1 Mbps)
• V_IO Pin on NCV7351D13 Version Allowing Direct Interfacing with
3 V to 5 V Microcontrollers
• EN Pin on NCV7351D1E Version Allowing Switching the
Transceiver to a Very Low Current OFF Mode
• Excellent Electromagnetic Susceptibility (EMS) Level Over Full
Frequency Range. Very Low Electromagnetic Emissions (EME) Low
EME also Without Common Mode (CM) Choke
• Bus Pins Protected Against >15 kV System ESD Pulses
• Transmit Data (TxD) Dominant Time−out Function
• Under all Supply Conditions the Chip Behaves Predictably. No
Disturbance of the Bus Lines with an Unpowered Node
• Bus Pins Short Circuit Proof to Supply Voltage and Ground
• Bus Pins Protected Against Transients in an Automotive
Environment
• Thermal Protection
• These are Pb−Free Devices
Quality
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
Typical Applications
• Automotive
• Industrial Networks
http://onsemi.com
MARKING
DIAGRAM
8
8
1
SOIC−8
CASE 751AZ
NV7351−y
ALYW
G
1
NV7351− = Specific Device Code
y = 3, 0, or E
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
G
= Pb−Free Package
PIN ASSIGNMENT
1
TxD
2
GND
3
V_CC
4
RxD
1
TxD
NCV7351D13R2G
(Top View)
2
GND
3
V_CC
4
RxD
1
TxD
NCV7351D10R2G
(Top View)
2
GND
3
V_CC
4
RxD
NCV7351D1ER2G
(Top View)
8
S
7
CANH
6
CANL
5
V_IO
8
S
7
CANH
6
CANL
5
NC
8
S
7
CANH
6
CANL
5
EN
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 10 of this data sheet.
© Semiconductor Components Industries, LLC, 2013
1
October, 2013 − Rev. 0
Publication Order Number:
NCV7351/D