|
NCV53480 Datasheet, PDF (1/60 Pages) ON Semiconductor – Low-Power OOK/FSK/ASK ISM Band Transceiver | |||
|
NCV53480
Low-Power OOK/FSK/ASK
ISM Band Transceiver
General Description
The NCV53480 ASSP is a low power OOK/FSK/ASK transceiver
designed for operation in the ISM band from 260 MHz to 470 MHz. It
http://onsemi.com
is intended for use in narrowband, low data rate applications in the
range of 1 kbps to 60 kbps. The receiver architecture is lowâIF, and
MARKING
contains image reject filtering to provide 40 dB of image reject. The IF
DIAGRAM
filter is fully integrated on chip with selectable bandwidth settings of
100 kHz, 200 kHz, and 300 kHz. The transmitter output power is
programmable from â20 to 10 dBm.
Onâchip digital circuitry can be configured to have the part perform
periodic channel polling on up to 3 channels, with full control of the
1 32
NQFP 32, 6x6
CASE 560AR
1
NCV53480âC
AWLYYWWG
CCCCC
polling interval and active receive time for each channel. Additional
register control can be used to have the part wake based on a pattern,
energy level, or detected ID.
NCV53480âC = Specific Device Code
A
= Assembly Location
WL = Wafer Lot
YY
= Year
WW = Work Week
Features
⢠Single Supply Operation from 2.2 V to 3.63 V
⢠Temperature Range: â40°C to +125°C
G
= PbâFree Package
CCCCC = Country of Origin*
(*Not required if assembled in USA)
⢠Simultaneous OOK/FSK (De)modulation
⢠No External Switch Needed Between LNA Input and PA Output
ORDERING INFORMATION
⢠Low Current Consumption Mode ( < 1 mA)
⢠Programmable Frequency Band from 280 MHz to 434 MHz with
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
Multichannel Operation (3 Channels)
⢠Continuous Receive Current Consumption < 10 mA
⢠FSK Receiver Sensitivity â109 dBm at 10 kbps NRZ
⢠OOK Receiver Sensitivity â118 dBm at 1 kbps NRZ
⢠WakeâOnâPattern and WakeâOnâEnergy capability
⢠Programmable Data Rates Up to 60 kbps
⢠SniffâMode Utilizing Patented QuickâStart Oscillator
⢠128 Bit Receive Buffer
⢠18 mA Continuous Transmit Mode at 10 dBm Output
Power
⢠Programmable Output Power from â20 dBm to
+10 dBm
Typical Applications
⢠TwoâWay Keyless Entry
⢠TPMS
⢠Remote Control
⢠Remote Sensing
⢠Automatic Meter Reading
⢠Dual Configurations for Sniffing, Receiving and
⢠Consumer Electronics
Transmitting To and From Different Sources
⢠Internal SelfâCalibration Routines
⢠These Devices are PbâFree and are RoHS Compliant
⢠Home and Building Automation
⢠Wireless Security Systems
⢠Telemetry
© Semiconductor Components Industries, LLC, 2013
1
August, 2013 â Rev. 6
Publication Order Number:
NCV53480/D
|
▷ |