NCV4279C Datasheet, PDF (1/14 Pages) ON Semiconductor – 5.0 V Micropower 150 mA LDO Linear Regulator with DELAY, Adjustable RESET and Sense Output

NCV4279C
5.0 V Micropower 150 mA
LDO Linear Regulator with
DELAY, Adjustable RESET,
and Sense Output
The NCV4279C is a 5.0 V precision micropower voltage regulator
with an output current capability of 150 mA.
The output voltage is accurate within ±2.0% with a maximum
dropout voltage of 0.5 V at 100 mA. Low quiescent current is a feature
drawing only 125 mA with a 1.0 mA load. This part is ideal for any and
all battery operated microprocessor equipment.
Microprocessor control logic includes an active reset output RO
with delay and a SI/SO monitor which can be used to provide an early
warning signal to the microprocessor of a potential impending reset
signal. The use of the SI/SO monitor allows the microprocessor to
finish any signal processing before the reset shuts the microprocessor
down.
The active Reset circuit operates correctly at an output voltage as
low as 1.0 V. The Reset function is activated during the power up
sequence or during normal operation if the output voltage drops
outside the regulation limits.
The reset threshold voltage can be decreased by the connection of an
external resistor divider to the R_ADJ lead. The regulator is protected
against reverse battery, short circuit, and thermal overload conditions.
The device can withstand load dump transients making it suitable for
use in automotive environments. The device has also been optimized
for EMC conditions.
If the application requires pullup resistors at the logic outputs Reset
and Sense Out, the NCV4269C with integrated resistors can be used.
Features
• 5.0 V ± 2.0% Output
• Low 125 mA Quiescent Current
• Active Reset Output Low Down to V_Q = 1.0 V
• Adjustable Reset Threshold
• 150 mA Output Current Capability
• Fault Protection
♦ +60 V Peak Transient Voltage
♦ −40 V Reverse Voltage
♦ Short Circuit
♦ Thermal Overload
• Early Warning through SI/SO Leads
• Internally Fused Leads in SO−14 Package
• Very Low Dropout Voltage
• Electrical Parameters Guaranteed Over Entire Temperature Range
• AEC−Q100 Grade 1 Qualified and PPAP Capable
• These are Pb−Free Devices
www.onsemi.com
8
1
14
1
MARKING
DIAGRAMS
SO−8
D1 SUFFIX
CASE 751
8
4279C5
ALYW
G
1
14
SO−14
D2 SUFFIX
CASE 751A
NCV4279C5G
AWLYWW
1
A
= Assembly Location
WL, L = Wafer Lot
Y
= Year
WW, W = Work Week
G
= PB−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 12 of this data sheet.
© Semiconductor Components Industries, LLC, 2015
1
May, 2015 − Rev. 4
Publication Order Number:
NCV4279C/D