NCV4269A_15 Datasheet, PDF (1/20 Pages) ON Semiconductor – Micropower 150 mA LDO Linear Regulator

NCV4269A
5.0 V, 3.3 V Micropower
150 mA LDO Linear
Regulator with DELAY,
Adjustable RESET, and
Sense Output
The NCV4269A is a 5.0 V and 3.3 V precision micropower voltage
regulator with an output current capability of 150 mA.
The output voltage is accurate within ±2.0% with a maximum
dropout voltage of 0.5 V at 100 mA. Low quiescent current is a feature
drawing only 190 mA with a 1.0 mA load. This part is ideal for any and
all battery operated microprocessor equipment.
Microprocessor control logic includes an active reset output RO
with delay and a SI/SO monitor which can be used to provide an early
warning signal to the microprocessor of a potential impending reset
signal. The use of the SI/SO monitor allows the microprocessor to finish
any signal processing before the reset shuts the microprocessor down.
The active Reset circuit operates correctly at an output voltage as
low as 1.0 V. The Reset function is activated during the power up
sequence or during normal operation if the output voltage drops
outside the regulation limits.
The reset threshold voltage can be decreased by the connection of an
external resistor divider to the R_ADJ lead. The regulator is protected
against reverse battery, short circuit, and thermal overload conditions.
The device can withstand load dump transients making it suitable for
use in automotive environments. The device has also been optimized
for EMC conditions.
Features
• 5.0 V and 3.3 V Output Voltage Options, ± 2.0% Accuracy
• Low 190 mA Quiescent Current
• Active Reset Output Low Down to V_Q = 1.0 V
• Adjustable Reset Threshold
• 150 mA Output Current Capability
• Fault Protection
♦ +60 V Peak Transient Voltage
♦ −40 V Reverse Voltage
♦ Short Circuit
♦ Thermal Overload
• Early Warning through SI/SO Leads
• Internally Fused Leads in SO−14 and SO−20 Packages
• Integrated Pullup Resistor at Logic Outputs (To Use External
Resistors, Select the NCV4279A)
• Very Low Dropout Voltage
• Electrical Parameters Guaranteed Over Entire Temperature Range
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These are Pb−Free Devices
www.onsemi.com
MARKING
DIAGRAMS
8
1
SO−8
D1 SUFFIX
CASE 751
8
4269Ax
ALYW
G
1
8
1
8
SO−8
EXPOSED PAD
PD SUFFIX
CASE 751AC
1
4269Ax
ALYW
G
14
1
SO−14
D2 SUFFIX
CASE 751A
14
NCV4269AxG
AWLYWW
1
20
20
1
SO−20
DW SUFFIX
CASE 751D
NCV4269Ax
AWLYYWWG
1
X
= 5 (5.0 V Output)
= 3 (3.3 V Output)
A
= Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
G, G = Pb Free
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 16 of this data sheet.
© Semiconductor Components Industries, LLC, 2015
1
January, 2015 − Rev. 4
Publication Order Number:
NCV4269A/D