NCV4264-2C Datasheet, PDF (1/10 Pages) ON Semiconductor – Low IQ Low Dropout Linear Regulator

NCV4264-2C
Low I_Q Low Dropout
Linear Regulator
The NCV4264−2C is a low quiescent current consumption LDO
regulator. Its output stage supplies 100 mA with "2.0% output
voltage accuracy.
Maximum dropout voltage is 500 mV at 100 mA load current.
It is internally protected against 45 V input transients, input supply
reversal, output overcurrent faults, and excess die temperature. No
external components are required to enable these features.
Features
• 3.3 V and 5.0 V Fixed Output
• "2.0% Output Accuracy, Over Full Temperature Range
• 33 mA Typical Quiescent Current
• 500 mV Maximum Dropout Voltage at 100 mA Load Current
• Wide Input Voltage Operating Range of 4.5 V to 45 V
• Internal Fault Protection
♦ −42 V Reverse Voltage
♦ Short Circuit/Overcurrent
♦ Thermal Overload
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• This is a Pb−Free Device
http://onsemi.com
MARKING
DIAGRAM
TAB
1 ₂₃
SOT−223
ST SUFFIX
CASE 318E
AYW
642CxG
G
1
x
= 5 (5.0 V Version)
= 3 (3.3 V Version)
A
= Assembly Location
Y
= Year
W
= Work Week
G
= Pb−Free Package
(*Note: Microdot may be in either location)
PIN CONNECTIONS
TAB
1
V_IN GND V_OUT
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
1
April, 2014 − Rev. 0
Publication Order Number:
NCV4264−2C/D