NCV3011DTBR2G Datasheet, PDF (1/28 Pages) ON Semiconductor – Synchronous PWM Controller

NCP3011, NCV3011
Synchronous PWM Controller
The NCP3011 is a PWM device designed to operate from a wide
input range and is capable of producing an output voltage as low as
0.8 V. The NCP3011 provides integrated gate drivers and an internally
set 400 kHz oscillator. The NCP3011 has an externally compensated
transconductance error amplifier with an internally fixed soft−start.
The NCP3011 incorporates output voltage monitoring with a Power
Good pin to indicate that the system is in regulation. The dual function
SYNC pin synchronizes the device to a higher frequency (Slave
Mode) or outputs a 180° out−of−phase clock signal to drive another
NCP3011 (Master Mode). Protection features include lossless current
limit and short circuit protection, output overvoltage and undervoltage
protection, and input undervoltage lockout. The NCP3011 is available
in a 14−pin TSSOP package.
Features
• Input Voltage Range from 4.7 V to 28 V
• 400 kHz Operation
• 0.8 V $1.0% Reference Voltage
• Buffered External +1.25 V Reference
• Current Limit and Short Circuit Protection
• Power Good
• Enable/Disable Pin
• Input Undervoltage Lockout
• External Synchronization
• Output Overvoltage and Undervoltage Protection
• NCV Prefix for Automotive and Other Applications Requiring Site
and Change Controls
• This is a Pb−Free Device
Typical Applications
• Set Top Box
• Power Modules
• ASIC / DSP Power Supply
VIN
CBST
CIN
VCC BST
EN
HSDR
PG
VSW
VREF
SYNC
LSDR
R ISET
GND
Q1
LO
Q2
RFB1
RFB2
VOUT
CO
RREF
COMP ^FB
CREF
RC
CC2
C C1
Figure 1. Typical Application Circuit
http://onsemi.com
14
1
TSSOP−14
DT SUFFIX
CASE 948G
MARKING DIAGRAM
14
3011
ALYWG
G
1
3011= Device Code
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
VREF
EN
NC
SYNC
PG
COMP
FB
PIN CONNECTIONS
(TOP VIEW)
VCC
BST
HSDR
VSW
NC
LSDR
GND
ORDERING INFORMATION
Device
Package
Shipping^†
NCP3011DTBR2G TSSOP−14 2500 / Tape & Reel
(Pb−Free)
NCV3011DTBR2G TSSOP−14 2500 / Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2011
1
June, 2011 − Rev. 3
Publication Order Number:
NCP3011/D