NCS6415 Datasheet, PDF (1/9 Pages) ON Semiconductor – Bus−Controlled Video Matrix Switch

NCS6415
Bus−Controlled Video
Matrix Switch
Description
The main function of the NCS6415 is to switch 8 video input
sources to the 6 outputs.
Each output can be switched to only one of the inputs, whereas any
single input may be connected to several outputs.
All switching possibilities are controlled through the I²C bus.
Features
• Cascadable with another NCS6415 (Internal Address can be changed
by Pin 7 Voltage)
• 8 Inputs (CVBS, RGB, Chroma, ...)
• 6 Outputs with Low Impedance Driver
• Possibility of Chroma Signal for each Input by Switching off the
Clamp with an External Resistor Bridge
• Bus Controlled
• 6.5 dB Gain between any Input and Output
• −45 dB Crosstalk at 5 MHz
• Compatible with TEA6415C
• Full ESD Protection
• These are Pb−Free Devices
http://onsemi.com
MARKING DIAGRAMS*
20
1
SO−20 WB
DW SUFFIX
CASE 751D
20
NCS6415
AWLYYWWG
1
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G = Pb−Free Package
*For additional marking information, refer to
Application Note AND8002/D.
INPUT1 ₁
DATA1 2
INPUT2 ₃
CLOCK 4
INPUT3 ₅
INPUT4 ₆
PROG 7
INPUT5 ₈
V_{CC 9}
INPUT6 ₁₀
20 INPUT8
19 GND
18 OUTPUT6
17 ^OUTPUT5
16 ^OUTPUT4
15 ^OUTPUT3
14 _OUTPUT2
13 OUTPUT1
12 GND
11 INPUT7
© Semiconductor Components Industries, LLC, 2006
September, 2006 − Rev. 0
ORDERING INFORMATION
Device
Package
Shipping^†
NCS6415DWG
SO−20
(Pb−Free)
38 Units / Rail
NCS6415DWR2G SO−20 1000 / Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
1
Publication Order Number:
NCS6415/D