|
NCS5650 Datasheet, PDF (1/9 Pages) ON Semiconductor – 2 Amp PLC Line Driver | |||
|
NCS5650
2 Amp PLC Line Driver
The NCS5650 is a high efficiency, Class A/B, low distortion power
line driver. Its design is optimized to accept a signal from a Power Line
Carrier modem. The output stage is designed to drive up to 2 A peak
into an isolation transformer or simple coil coupling to the mains. At
output current of 1.5 A, the output voltage is guaranteed to swing
within 1 V or less of either rail giving the user improved SNR. Power
supply options are singleâsided 6 V to 12 V and dual balanced
$3.0 V to $6.0 V. The input stage contains an operational amplifier
which can be configured as a unity gain follower buffer or used to
provide the first stage of a 4âpole low pass filter. In addition the
NCS5650 offers a current limit programmable with a single resistor,
RâLimit, together with a current limit flag.
The device provides two independent thermal flags with hysteresis:
a thermal warning flag to let the user know the internal junction
temperature has reached a user programmable thermal warning
threshold and a thermal error flag that indicates the internal junction
temperature has exceeded 150°C. In shutdown mode the NCS5650
output goes into a highâimpedance state. The NCS5650 comes in a 20
lead QFN package (4x4x1mm) with an exposed thermal pad for
enhanced thermal reliability.
Features
⢠RailâtoâRail Drop of Only $1 V with Iout = 1.5 A
⢠VCC: SingleâSided (6 V to 12 V) or DualâBalanced $6.0 V
⢠Flexible 4thâOrder Filtering
⢠CurrentâLimit Set with One Resistor
⢠Diagnostic Flags Level Shifted to V_mc to Simplify Interface with
External MCU
⦠Thermal Warning Flag with Flexible Threshold Setting
⦠Thermal Error flag and Shutdown
⦠Overcurrent Flag
⢠Enable/Shutdown Control
⢠Extended Junction Temperature Range: â40°C to +125°C
⢠Small Package: 20âpin 4x4x1mm QFN with Exposed Thermal Pad
⢠Optimized for Operation in the Cenelec A to D Frequency Band
⢠This is a PbâFree Device
Typical Applications
⢠Power Line Communication Driver in AMM and AMR Metering
Systems
⢠Valve, Actuator, and Motor Driver
⢠Audio
http://onsemi.com
1 20
QFN20
CASE 485E
MARKING
DIAGRAM
20
1
NCS
5650
ALYWG
G
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
G
= PbâFree Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping
NCS5650MNTXG QFN20 3000 / Tape & Reel
(PbâFree)
â For information on tape and reel specifications,
including part or orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2010
1
May, 2010 â Rev. 0
Publication Order Number:
NCS5650/D
|
▷ |