|
NCS2211 Datasheet, PDF (1/10 Pages) ON Semiconductor – Low Distortion Audio Power Amplifier with Differential Output and Shutdown Mode | |||
|
NCS2211
Low Distortion Audio Power
Amplifier with Differential
Output and Shutdown Mode
Product Description
The NCS2211 is a high performance, low distortion Class A/B
audio amplifier. It is capable of delivering 1ÄW of output power into an
8ÄW speaker bridge-tied load (BTL). The NCS2211 will operate over a
wide temperature range, and it is specified for single-supply voltage
operation for portable applications.
It features low distortion performance, 0.2% typical THD + N @
1ÄW and incorporates a shutdown/enable feature to extend battery life.
The shutdown/enable feature will reduce the quiescent current to 1ÄmA
maximum.
The NCS2211 is designed to operate over the -40°C to +85°C
temperature range, and is available in an 8-lead SOIC package and a
3ÄXÄ3 mm DFN8 package. The SOIC package is pin compatible with
equivalent function and comparable performance to competitive
devices as is the DFN8 package. The DFN8 has a low thermal
resistance of only 70°C/W plus has an exposed metal pad to facilitate
heat conduction to copper PCB material.
Low distortion, high power, low quiescent current, and small
packaging makes the NCS2211 suitable for applications including
notebook and desktop computers, PDA's, and speaker phones.
Features
â¢ÄDifferential Output
â¢Ä1.0 W into an 8 W Speaker
â¢Ä1.5 W into a 4 W Speaker
â¢ÄSingle Supply Operation: 2.7 V to 5.5 V
â¢ÄTHD+N: 0.2% @ 1 W Output
â¢ÄLow Quiescent Current: 20 mA Max
â¢ÄShutdown Current < 1.0 mA
â¢ÄExcellent Power Supply Rejection
â¢ÄTwo Package Options: SOIC-8 Package and DFN8
â¢ÄPin Compatible with Competitive Devices
â¢ÄThese are Pb-Free Devices
Applications
â¢ÄDesktop Computers
â¢ÄNotebook Computers
â¢ÄPDA's
â¢ÄSpeaker Phones
â¢ÄGames
http://onsemi.com
8
1
SOIC-8
D SUFFIX
CASE 751
MARKING
DIAGRAMS
8
N2211
ALYWG
G
1
1
8
DFN8
N2211
1
MN SUFFIX
CASE 506BJ
ALYWG
G
N2211
A
L
Y
W
G
= Specific Device Code
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb-Free Package
(Note: Microdot may be in either location)
PIN ASSIGNMENT
PIN NAME
DESCRIPTION
1 Enable Enable (LOW)/Shutdown (HIGH)
2
Bias
Bias Output at (VCC-VEE)/2;
Bypass with Capacitor to
Reduce Noise
3
IN+ Non-Inverting Input
4
IN- Inverting Input
5 OUT+ Output+
6
VCC
Positive Supply (Bypass with
10ÄmF in parallel with 0.1ÄmF)
7
VEE
Negative Supply (Connect to GND
for Single-Supply Operation)
8 OUT- Output-
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
婀 Semiconductor Components Industries, LLC, 2008
1
February, 2008 - Rev. 0
Publication Order Number:
NCS2211/D
|
▷ |