NCS2200_10 Datasheet, PDF (1/17 Pages) ON Semiconductor – Low Voltage Comparators

NCS2200 Series, NCS2200A
Low Voltage Comparators
The NCS2200 Series is an industry first sub−one volt, low power
comparator family. These devices consume only 10 mA of supply
current. They are guaranteed to operate at a low voltage of 0.85 V
which allows them to be used in systems that require less than 1.0 V
and are fully operational up to 6.0 V which makes them convenient for
use in both 3.0 V and 5.0 V systems. Additional features include no
output phase inversion with overdriven inputs, internal hysteresis,
which allows for clean output switching, and rail−to−rail input and
output performance. The NCS2200 Series is available in the tiny
SOT−23−5 package. There are four options featuring two industry
standard pinouts. Additionally, the NCS2200 and NCS2202 are
available in the SC70−5 package. The NCS2200 is also available in
the tiny DFN 2x2.2 package. The NCS2200A is available in UDFN
1.2x1.0 package. (Table 1)
Features
• Operating Voltage of 0.85 V to 6.0 V
• Rail−to−Rail Input/Output Performance
• Low Supply Current of 10 mA
• No Phase Inversion with Overdriven Input Signals
• Glitchless Transitioning in or out of Tri−State Mode
• Complementary or Open Drain Output Configuration
• Internal Hysteresis
• Propagation Delay of 1.1 ms
• Pb−Free Packages are Available
Typical Applications
• Single Cell NiCd/NiMH Battery Powered Applications
• Cellular Telephones
• Alarm and Security Systems
• Personal Digital Assistants
http://onsemi.com
5
1
1
6
SOT−23−5 (TSOP−5)
SN SUFFIX
CASE 483
DFN 2x2.2
SQL SUFFIX
CASE 488
5
1
SC70−5
SQ SUFFIX
CASE 419A
UDFN 1.2x1.0
MU SUFFIX
CASE 517AA
1
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 12 of this data sheet.
DEVICE MARKING INFORMATION
See general marking information in the device marking
section on page 13 of this data sheet.
© Semiconductor Components Industries, LLC, 2010
1
August, 2010 − Rev. 10
Publication Order Number:
NCS2200/D