NCS210_16 Datasheet, PDF (1/6 Pages) ON Semiconductor – Current-Shunt Monitor, Voltage Output Bi-Directional Zero-Drift

NCS210, NCS211, NCS212,
NCS213, NCS214, NCS215
Current-Shunt Monitor,
Voltage Output,
Bi-Directional Zero-Drift
The NCS210, NCS211, NCS212, NCS213, NCS214, and NCS215
are voltage output current shunt monitors that can measure voltage
across shunts at common−mode voltages from −0.3 V to 26 V,
independent of supply voltage. Six fixed gains are available: 50 V/V,
75 V/V, 100 V/V, 200 V/V, 500 V/V, or 1000 V/V. The low offset of
the zero−drift architecture enables current sensing with maximum
drops across the shunt as low as 10 mV full−scale.
The devices can operate from a single +2.7 V to +26 V power
supply, drawing a maximum of 100 mA of supply current. All versions
are specified over the extended operating temperature range (–40°C to
+125°C). Available in SC−70 and thin UQFN space−saving packages.
Features
• Wide Common−Mode Input Range −0.3 V to 26 V
• Supply Voltage Range from 2.7 V to 26 V
• Low Offset Voltage ±60 mV Max
• Low Offset Drift (0.1 mV/°C)
• Low Gain Error (max 1%)
• Rail−to−rail Input and Output Capability
• Low Current Consumption (typ 65 mA, 100 mA max)
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site Qualified and PPAP Capable
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Typical Applications
• Current Sensing (High−Side/Low−Side)
• Automotive
• Telecom
• Sensors
This document contains information on some products that are still under development.
ON Semiconductor reserves the right to change or discontinue these products without
notice.
© Semiconductor Components Industries, LLC, 2016
1
October, 2016 − Rev. 6
www.onsemi.com
SC70−6
SQ SUFFIX
CASE 419B
1
UQFN10
MU SUFFIX
CASE 488AT
PIN CONNECTIONS
REF 1
6 OUT
GND 2
5 IN−
V_S 3
4 IN+
REF 8
*NC V_S
76
5 IN−
GND 9
4 IN−
OUT 10 1 2 3 IN+
*NC IN+
*NC denotes no internal connection. These pins can be left floating or
connected to any voltage between Vs and GND.
MARKING DIAGRAMS
6
XXXMG
G
XXMG
G
1
XXX = Specific Device Code (See page 4)
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
Product
Gain
R3−R4
R1−R2
NCS213
50
20 kW
1 MW
NCS215
75
13.3 kW
1 MW
NCS214
100
10 kW
1 MW
NCS210
200
5 kW
1 MW
NCS211
500
2 kW
1 MW
NCS212
1000
1 kW
1 MW
V_OUT + ^ǒI_LOAD R_SHUNT^ǓGAIN ) V_REF
ORDERING INFORMATION
See detailed ordering, marking and shipping information on
page 4 of this data sheet.
Publication Order Number:
NCS210/D