NCS210 Datasheet, PDF (1/5 Pages) ON Semiconductor – Current-Shunt Monitor Voltage Output Bi-Directional Zero-Drift

NCS210, NCS211, NCS212,
NCS213, NCS214, NCS215
Current-Shunt Monitor,
Voltage Output,
Bi-Directional Zero-Drift
The NCS210, NCS211, NCS212, NCS213, NCS214, and NCS215
are voltage output current shunt monitors that can measure voltage
across shunts at common−mode voltages from −0.3 V to 26 V,
independent of supply voltage. Six fixed gains are available: 50 V/V,
75 V/V, 100 V/V, 200 V/V, 500 V/V, or 1000 V/V. The low offset of
the zero−drift architecture enables current sensing with maximum
drops across the shunt as low as 10 mV full−scale.
The devices can operate from a single +2.7 V to +26 V power
supply, drawing a maximum of 100 mA of supply current. All versions
are specified over the extended operating temperature range (–40°C to
+125°C).
Features
• Wide Common−Mode Input Range −0.3 V to 26 V
• Supply Voltage Range from 2.7 V to 26 V
• Low Offset Voltage ±60 mV Max
• Low Offset Drift (0.1 mV/°C)
• Low Gain Error (max 1%)
• Rail−to−rail Input and Output Capability
• Low Current Consumption (typ 65 mA, 100 mA max)
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site Qualified and PPAP Capable
• These are Pb−free Devices
Typical Applications
• Current Sensing (High−Side/Low−Side)
• Automotive
• Telecom
• Sensors
www.onsemi.com
SC70−6
SQ SUFFIX
CASE 419B
PIN CONNECTIONS
REF 1
GND 2
V_S 3
6 OUT
5 IN−
4 IN+
MARKING DIAGRAM
6
XXXMG
G
1
XXX = Specific Device Code (See page 4)
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
Product
NCS213
NCS215
NCS214
NCS210
NCS211
NCS212
Gain
50
75
100
200
500
1000
R3−R4
20 kW
13.3 kW
10 kW
5 kW
2 kW
1 kW
R1−R2
1 MW
1 MW
1 MW
1 MW
1 MW
1 MW
V_OUT + ^ǒI_LOAD R_SHUNT^ǓGAIN ) V_REF
ORDERING INFORMATION
See detailed ordering, marking and shipping information on
page 4 of this data sheet.
© Semiconductor Components Industries, LLC, 2015
1
October, 2015 − Rev. 0
Publication Order Number:
NCS210/D