English
Language : 

NCP803 Datasheet, PDF (1/8 Pages) ON Semiconductor – Very Low Supply Current 3-Pin Microprocessor Reset Monitor
NCP803
Very Low Supply Current
3−Pin Microprocessor
Reset Monitor
The NCP803 is a cost-effective system supervisor circuit designed
to monitor VCC in digital systems and provide a reset signal to the host
processor when necessary. No external components are required.
The reset output is driven active within 10 µsec of VCC falling
through the reset voltage threshold. Reset is maintained active for a
minimum of 140 msec after VCC rises above the reset threshold. The
NCP803 has an open drain active-low RESET output. The output of
the NCP803 is guaranteed valid down to VCC = 1.0 V and is available
in a SOT-23 package.
The NCP803 is optimized to reject fast transient glitches on the VCC
line. Low supply current of 1.0 µA (VCC = 3.2 V) make this device
suitable for battery powered applications.
Features
• Precision VCC Monitor for 2.5 V, 3.0 V, 3.3 V, and 5.0 V Supplies
• Precision Monitoring Voltages from 1.6 V to 4.9 V Available
in 100 mV Steps
• 140 msec Guaranteed Minimum RESET Output Duration
• RESET Output Guaranteed to VCC = 1.0 V
• Low 1.0 µA Supply Current
• VCC Transient Immunity
• Small SOT-23 Package
• No External Components
• Wide Operating Temperature: -40°C to 105°C
Typical Applications
• Computers
• Embedded Systems
• Battery Powered Equipment
• Critical µP Power Supply Monitoring
VCC
C = 100 nF
VCC
NCP803
RESET
Rpull- up
VCC
µP
RESET
GND
GND
0
0
Figure 1. Typical Application Diagram
http://onsemi.com
MARKING
DIAGRAM
3
SOT-23
3
(TO-236)
xxxM
1
2
CASE 318
1
2
xxx = Specific Device Code
M = Monthly Date Code
PIN CONFIGURATION
GND 1
3 VCC
RESET 2
SOT-23*
(Top View)
NOTE: *SOT-23 is equivalent to JEDEC (TO-236)
ORDERING INFORMATION
Device
Package
Shipping
NCP803SNxxxT1 SOT-23 3000/Tape & Reel
NOTE: The “xxx” denotes a suffix for Vcc voltage threshold
options - see page 6 for more details.
DEVICE MARKING INFORMATION
See general marking information in the device marking
section on page 6 of this data sheet.
© Semiconductor Components Industries, LLC, 2003
1
May, 2003 - Rev. 4
Publication Order Number:
NCP803/D