NCP716B Datasheet, PDF (1/8 Pages) ON Semiconductor – Wide Input Voltage Low Dropout, Ultra-Low Iq Regulator

NCP716B
Wide Input Voltage Low
Dropout, Ultra-Low Iq
Regulator
The NCP716B is 150 mA LDO Linear Voltage Regulator. It is a
very stable and accurate device with ultra−low ground current
consumption (4.7 mA over the full output load range) and a wide input
voltage range (up to 24 V). The regulator incorporates several
protection features such as Thermal Shutdown and Current Limiting.
Features
• Operating Input Voltage Range: 2.5 V to 24 V
• Fixed Voltage Options Available:
3.0 V and 5.0 V
• Ultra Low Quiescent Current: Max. 4.7 mA over Temperature
• ±2% Accuracy over Full Temperature Range
• Noise: 115 mV_RMS from 200 Hz to 100 kHz
• Thermal Shutdown and Current Limit Protection
• Available in TSOP−5 Package
• This is a Pb−Free Device
Typical Applicaitons
• Portable Equipment
• Communication Systems
• Industrial Measurement Systems
• Home Automation Devices
Vin= (4 − 24 V)
Vout = 3.0V, 5.0V/150 mA
NCP716B
Vin
Vout
Cin
Cout
1uF GND
1uF
Figure 1. Typical Application Schematic
www.onsemi.com
MARKING
DIAGRAM
5
5
1
TSOP−5
CASE 483
XXXAYWG
G
1
XXX = Specific Device Code
A = Assembly Location
Y = Year
W = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
PIN CONNECTIONS
1
OUT
GND
5
N/C
IN
N/C
TSOP−5
(Top View)
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 7 of this data sheet.
© Semiconductor Components Industries, LLC, 2016
1
June, 2016 − Rev. 0
Publication Order Number:
NCP716B/D