NCP715 Datasheet, PDF (1/20 Pages) ON Semiconductor – 50 mA Ultra-Low Iq, Wide Input Voltage, Low Dropout Linear Voltage Regulator

NCP715
50 mA Ultra-Low Iq, Wide
Input Voltage, Low Dropout
Linear Voltage Regulator
The NCP715 is 50 mA LDO Linear Voltage Regulator. It is a very
stable and accurate device with ultra−low ground current consumption
(4.7 mA over the full output load range) and a wide input voltage range
(up to 24 V). The regulator incorporates several protection features
such as Thermal Shutdown and Current Limiting.
Features
• Operating Input Voltage Range: 2.5 V to 24 V
• Fixed Voltage Options Available: 1.2 V to 5.0 V
• Ultra Low Quiescent Current: Max. 4.7 mA Over Full Load and
Temperature
• ±2% Accuracy Over Full Load, Line and Temperature Variations
• PSRR: 52 dB at 100 kHz
• Noise: 190 mV_RMS from 200 Hz to 100 kHz
• Thermal Shutdown and Current Limit protection
• Available in XDFN6 1.5 x 1.5 mm and SC−70 (SC−88A) Package
• These are Pb−Free Devices
Typical Applications
• Portable Equipment
• Communication Systems
2.5 V < V_out < 24 V
IN
OUT
1.2 V < V_out < 5 V
1 mF
Ceramic
NCP715
NC
NC
GND
1 mF
Ceramic
http://onsemi.com
MARKING
DIAGRAMS
XDFN6
CASE 711AE
XX MG
G
1
SC−70−5
(SC−88A)
CASE 419A
XX MG
G
XX
= Specific Device Code
M
= Date Code
G
= Pb−Free Package
(*Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 18 of this data sheet.
Figure 1. Typical Application Schematic
© Semiconductor Components Industries, LLC, 2013
1
December, 2013 − Rev. 2
Publication Order Number:
NCP715/D