NCP612SQ30T2G Datasheet, PDF (1/9 Pages) ON Semiconductor – 100 mA CMOS Low Iq Voltage Regulator in an SC70-5

NCP612, NCV612
100 mA CMOS Low Iq
Voltage Regulator in an
SC70-5
The NCP612/NCV612 series of fixed output linear regulators are
designed for handheld communication equipment and portable battery
powered applications which require low quiescent. The
NCP612/NCV612 series features an ultra−low quiescent current of
40 mA. Each device contains a voltage reference unit, an error
amplifier, a PMOS power transistor, resistors for setting output
voltage, current limit, and temperature limit protection circuits.
The NCP612/NCV612 has been designed to be used with low cost
ceramic capacitors. The device is housed in the micro−miniature
SC70−5 surface mount package. Standard voltage versions are 1.5,
1.8, 2.5, 2.7, 2.8, 3.0, 3.1, 3.3, 3.7, and 5.0 V.
Features
 Low Quiescent Current of 40 mA Typical
 Low Dropout Voltage of 230 mV at 100 mA and 3.0 V V_out
 Low Output Voltage Option
 Output Voltage Accuracy of 2.0%
 Temperature Range of −40C to 85C (NCP612)
Temperature Range of −40C to 125C (NCV612)
 NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
 These are Pb−Free Devices
Typical Applications
 Cellular Phones
 Battery Powered Consumer Products
 Hand−Held Instruments
 Camcorders and Cameras
Battery or
Unregulated
Voltage
+
C1
1
2
Vout
5
+
C2
ON
OFF
3
4
This device contains 86 active transistors
Figure 1. Typical Application Diagram
http://onsemi.com
SC70−5
CASE 419A
PIN CONNECTIONS
V_in 1
Gnd 2
Enable 3
5 V_out
4 N/C
(Top View)
MARKING DIAGRAM
5
xxxM G
G
1
xxx = Specific Device Code
M = Date Code*
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
 Semiconductor Components Industries, LLC, 2013
1
May, 2013 − Rev. 3
Publication Order Number:
NCP612/D