English
Language : 

NCP605 Datasheet, PDF (1/13 Pages) ON Semiconductor – 500mA, Low IGND, CMOS LDO Regulator with/without Enable and with Enhanced ESD Protection
NCP605, NCP606
500mA, Low IGND, CMOS
LDO Regulator with/without
Enable and with Enhanced
ESD Protection
The NCP605/NCP606 provide in excess of 500 mA of output
current at fixed voltage options or an adjustable output voltage from
5.0 V down to 1.25 V. These devices are designed for space
constrained and portable battery powered applications and offer
additional features such as high PSRR, low noise operation, short
circuit and thermal protection. The devices are designed to be used
with low cost ceramic capacitors and are packaged in the DFN6 3x3.3.
NCP605 is designed without enable pin, NCP606 is designed with
enable pin.
Features
• Output Voltage Options:
Adjustable, 1.5 V, 1.8 V, 2.5 V, 2.8 V, 3.0 V, 3.3 V, 5.0 V
• Adjustable Output by External Resistors from 5.0 V down to 1.25 V
• Current Limit 675 mA
• Low IGND (Independent of Load)
• $1.5% Output Voltage Tolerance Over All Operating Conditions
(Adjustable)
• $2% Output Voltage Tolerance Over All Operating Conditions
(Fixed)
• NCP605 Fixed is Direct Replacement LP8345
• Typical Noise Voltage of 50 mVrms without a Bypass Capacitor
• Enhanced ESD Ratings: 4 kV Human Body Mode (HBM)
400 V Machine Model (MM)
• These are Pb−Free Devices
Typical Applications
• Hard Disk Drivers
• Notebook Computers
• Battery Power Electronics
• Portable Instrumentation
Vin
Cin
Vin
Vout
NCP605
(Fixed)
SENSE
GND
Vout
Cout
http://onsemi.com
1
DFN6, 3x3.3
MN SUFFIX
CASE 506AX
MARKING
DIAGRAM
xxxx
zzz
AYWWG
G
xxxx
zzz
A
Y
WW
G
= P605 or P606
= ADJ, 150, 180, 250, 280,
300, 330, 500
= Assembly Location
= Year
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
NCP605 PIN CONNECTIONS
DFN6 3x3.3mm
Vin 1
6 Vin
GND 2 GND 5 SENSE/ADJ
NC 3
4 Vout
(TOP VIEW)
NCP606 PIN CONNECTIONS
DFN6 3x3.3mm
Vin 1
GND 2
GND
6 Vin
5 SENSE/ADJ
EN 3
4 Vout
(TOP VIEW)
Figure 1. NCP605 Typical Application Circuit for Fixed
Version (1.5 V, 1.8 V, 2.5 V, 2.8 V, 3.0 V, 3.3 V, 5.0 V)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 12 of this data sheet.
© Semiconductor Components Industries, LLC, 2008
1
May, 2008 − Rev. 1
Publication Order Number:
NCP605/D