|
NCP5911 Datasheet, PDF (1/9 Pages) ON Semiconductor – IMVP7.0 Compatible Synchronous Buck MOSFET Driver | |||
|
NCP5911
IMVP7.0 Compatible
Synchronous Buck MOSFET
Driver
The NCP5911 is a high performance dual MOSFET gate driver
optimized to drive the gates of both highâside and lowâside power
MOSFETs in a synchronous buck converter. It can drive up to 3 nF
load with a 25 ns propagation delay and 20 ns transition time.
Adaptive antiâcrossâconduction and power saving operation circuit
can provide a low switching loss and high efficiency solution for
notebook systems.
A bidirectional Enable pin can provide a fault signal to the
controller when the gate driver detects an undervoltage lockout. The
UVLO function guarantees the outputs are low when the supply
voltage is low.
Features
⢠Faster Rise and Fall Times
⢠Adaptive AntiâCrossâConduction Circuit
⢠Zero Cross Detection function
⢠Output Disable Control Turns Off Both MOSFETs
⢠Undervoltage Lockout
⢠Power Saving Operation Under Light Load Conditions
⢠Direct Interface to NCP6131 and Other Compatible PWM
Controllers
⢠Thermally Enhanced Package
⢠These Devices are PbâFree and are RoHS Compliant*
Typical Applications
⢠Power Management Solutions for Notebook systems
http://onsemi.com
1
DFN8
CASE 506AA
MARKING
DIAGRAM
1
ALMG
G
AL = Specific Device Code
M = Date Code
G = PbâFree Package
(Note: Microdot may be in either location)
PINOUT DIAGRAM
BST 1
PWM 2
EN 3
VCC 4
FLAG
9
8 DRVH
7 SW
6 GND
5 DRVL
ORDERING INFORMATION
Device
Package
Shippingâ
NCP5911MNTBG DFN8 3000 / Tape & Reel
(PbâFree)
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
*For additional information on our PbâFree strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2011
1
February, 2011 â Rev. 1
Publication Order Number:
NCP5911/D
|
▷ |