NCP5661DT18RKG Datasheet, PDF (1/12 Pages) ON Semiconductor – Low Output Voltage, Ultra-Fast 1.0 A Low Dropout Linear Regulator with Enable

NCP5661, NCV5661
Low Output Voltage,
Ultra-Fast 1.0 A Low Dropout
Linear Regulator with Enable
The NCP5661/NCV5661 is a high performance, low dropout linear
regulator designed for high power applications that require up to 1.0 A
current. It is offered in both fixed and adjustable output versions. With
output voltages as low as 0.9 V and ultra−fast response times for load
transients, the NCP5661/NCV5661 also provides additional features
such as Enable and Error Flag (for the fixed output version),
increasing the utility of these devices. A thermally robust, 5 pin DPAK
or DFN 3x3.3 mm, combined with an architecture that offers low
ground current (independent of load), provides for a superior
high−current LDO solution.
Features
 Ultra−Fast Transient Response (Settling Time: 1−3 ms)
 Low Noise Without Bypass Capacitor (26 mV_rms)
 Low Ground Current Independent of Load (3.0 mA Maximum)
 Fixed/Adjustable Output Voltage Versions
 Enable Function
 Error Flag (Fixed Output Version)
 Current Limit Protection
 Thermal Protection
 0.9 V Reference Voltage for Ultra−Low Output Operation
 Power Supply Rejection Ratio > 65 dB
 NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
 These are Pb−Free Devices
Applications
 Servers
 ASIC Power Supplies
 Post Regulation for Power Supplies
 Constant Current Source
 Networking Equipment
 Gaming and STB Modules
http://onsemi.com
MARKING
DIAGRAMS
NCP5661 NCV5661
1
5
DPAK−5 CENTER
LEAD CROP
CASE 175AA
5661xG
ALYWW
V5661xG
ALYWW
1
DFN6
MN SUFFIX
CASE 506AX
NCP5661
1 _661x
AYWWG
G
NCV5661
1 ^V661
zzz
AYWWG
G
x = A for Adjustable Version
B for Fixed 1.2 V
C for Fixed 3.3 V
D for Fixed 1.5 V
E for Fixed 1.8 V
F for Fixed 2.5 V
G for Fixed 2.8 V
H for Fixed 3.0 V
zzz = 12 for Fixed 1.2 V
15 for Fixed 1.5 V
18 for Fixed 1.8 V
25 for Fixed 2.5 V
28 for Fixed 2.8 V
30 for Fixed 3.0 V
33 for Fixed 3.3 V
ADJ for Adjustable Version
A = Assembly Location
L = Wafer Lot
Y = Year
WW = Work Week
G = Pb−Free
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 10 of this data sheet.
 Semiconductor Components Industries, LLC, 2013
1
May, 2013 − Rev. 17
Publication Order Number:
NCP5661/D