NCP561SN33T1G Datasheet, PDF (1/10 Pages) ON Semiconductor – 150 mA CMOS Low Iq Low-Dropout Voltage Regulator

NCP561
150 mA CMOS Low Iq
Low-Dropout Voltage
Regulator
The NCP561 series of fixed output low dropout linear regulators are
designed for handheld communication equipment and portable battery
powered applications which require low quiescent. The NCP561
series features an ultralow quiescent current of 3.0 mA. Each device
contains a voltage reference unit, an error amplifier, a PMOS power
transistor, resistors for setting output voltage, current limit, and
temperature limit protection circuits.
The NCP561 has been designed to be used with low cost ceramic
capacitors and requires a minimum output capacitor of 1.0 mF. The
device is housed in the micro-miniature TSOP-5 surface mount
package. Standard voltage versions are 1.5 V, 1.8 V, 2.5 V, 2.7 V,
2.8 V, 3.0 V, 3.3 V and 5.0 V.
Features
•ăLow Quiescent Current of 3.0 mA Typical
•ăLow Dropout Voltage of 170 mV at 150 mA
•ăLow Output Voltage Option
•ăOutput Voltage Accuracy of 2.0%
•ăIndustrial Temperature Range of -40°C to 85°C
•ăPb-Free Packages are Available
Typical Applications
•ăBattery Powered Instruments
•ăHand-Held Instruments
•ăCamcorders and Cameras
V_IN
1
Thermal
Shutdown
Driver w/
Current
Limit
Enable
ON ³
V_OUT
5
OFF
GND 2
This device contains 28 active transistors
Figure 1. Representative Block Diagram
http://onsemi.com
5
1
TSOP-5
SN SUFFIX
CASE 483
PIN CONNECTIONS AND
MARKING DIAGRAM
V_IN 1
GND 2
5 V_OUT
Enable 3
4 N/C
(Top View)
XXX
A
Y
W
G
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Pb-Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
©Ă Semiconductor Components Industries, LLC, 2007
1
August, 2007 - Rev. 5
Publication Order Number:
NCP561/D