NCP5501DT33RKG Datasheet, PDF (1/13 Pages) ON Semiconductor – 500 mA LDO Voltage Regulator

NCP5500, NCV5500,
NCP5501, NCV5501
500 mA LDO Voltage
Regulator
These linear low drop voltage regulators provide up to 500 mA over
a user−adjustable output range of 1.25 V to 5.0 V, or at a fixed output
voltage of 1.5 V, 3.3 V or 5.0 V, with typical output voltage accuracy
better than 3%. An internal PNP pass transistor permits low dropout
voltage and operation at full load current at the minimum input
voltage. NCV versions are qualified for demanding automotive
applications that require extended temperature operation and site and
change control. NCP5500 and NCV5500 versions include an
Enable/Shutdown function and are available in a DPAK 5 and SOIC 8
packages. NCP5501 and NCV5501 versions are available in DPAK 3
for applications that do not require logical on/off control.
This regulator family is ideal for applications that require a broad
input voltage range, and low dropout performance up to 500 mA load
using low cost ceramic capacitors. Integral protection features include
short circuit current and thermal shutdown.
Features
 Output Current up to 500 mA
 2.9% Output Voltage Accuracy
 Low Dropout Voltage (230 mV at 500 mA)
 Enable Control Pin (NCP5500 / NCV5500)
 Reverse Bias Protection
 Short Circuit Protection
 Thermal Shutdown
 Wide Operating Temperature Range
NCV5500 / NCV5501; −40C to +125C Ambient Temperature
NCP5500 / NCP5501; −40C to +85C Ambient Temperature
 NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
 Stable with Low Cost Ceramic Capacitors
 These are Pb−Free Devices
Typical Applications
 Automotive
 Industrial and Consumer
 Post SMPS Regulation
 Point of Use Regulation
http://onsemi.com
MARKING DIAGRAMS
1
5
DPAK 5
CENTER LEAD CROP
CASE 175AA
x5500yG
ALYWW
Pin 1. EN
2. V_in
TAB,3. GND
4. V_out
5. NC/ADJ
1
5
4
12
3
Pin 1. V_in
TAB,2. GND
3. V_out
DPAK 3
SINGLE GAUGE
CASE 369C
x5501yG
ALYWW
1
3
x
5500/1
y
A
L
Y
WW
G
= P (NCP), V (NCV)
= Device Code
= Output Voltage
= L = 1.5 V
= T = 3.3 V
= U = 5.0 V
= W = Adjustable
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
8
1
Pin 1. V_in
2. GND
3. GND
4. V_out
5. NC/ADJ
6. GND
7. GND
8. EN
SOIC−8
CASE 751
8
5500x
ALYW
G
1
x = Output Voltage, NCP/NCV
A = Adjustable, NCV
B = Adjustable, NCP
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 10 of this data sheet.
 Semiconductor Components Industries, LLC, 2013
1
April, 2013 − Rev. 12
Publication Order Number:
NCP5500/D