|
NCP5392P Datasheet, PDF (1/32 Pages) ON Semiconductor – 2/3/4-Phase Controller for CPU Applications | |||
|
NCP5392P
2/3/4-Phase Controller for
CPU Applications
The NCP5392P provides up to a four-phase buck solution which
combines differential voltage sensing, differential phase current
sensing, and adaptive voltage positioning to provide accurately
regulated power for both Intel and AMD processors. Dual-edge
pulse-width modulation (PWM) combined with inductor current
sensing reduces system cost by providing the fastest initial response
to dynamic load events. Dual-edge multiphase modulation reduces
the total bulk and ceramic output capacitance required to meet
transient regulation specifications.
A high performance operational error amplifier is provided to
simplify compensation of the system. Dynamic Reference Injection
further simplifies loop compensation by eliminating the need to
compromise between closed-loop transient response and Dynamic
VID performance.
In addition, NCP5392P provides an automatic power saving
feature (Auto-PSI). When Auto-PSI function is enabled, NCP5392P
will automatically detect the VID transitions and direct the Vcore
regulator in or out of low power states. As a result, the best efficiency
scheme is always chosen.
Features
â¢ÄMeets Intel's VR11.1 Specifications
â¢ÄMeets AMD 6 Bit Code Specifications
â¢ÄDual-edge PWM for Fastest Initial Response to Transient Loading
â¢ÄHigh Performance Operational Error Amplifier
â¢ÄInternal Soft Start
â¢ÄDynamic Reference Injection (Patent #US07057381)
â¢ÄDAC Range from 0.375 V to 1.6 V
â¢ÄDAC Feed Forward Function (Patent Pending)
â¢Ä±0.5% DAC Voltage Accuracy from 1.0 V to 1.6 V
â¢ÄTrue Differential Remote Voltage Sensing Amplifier
â¢ÄPhase-to-Phase Current Balancing
â¢ÄâLosslessâ Differential Inductor Current Sensing
â¢ÄDifferential Current Sense Amplifiers for each Phase
â¢ÄAdaptive Voltage Positioning (AVP)
â¢ÄOscillator Frequency Range of 100 kHz â 1 MHz
â¢ÄLatched Over Voltage Protection (OVP)
â¢ÄGuaranteed Startup into Pre-Charged Loads
â¢ÄThreshold Sensitive Enable Pin for VTT Sensing
â¢ÄPower Good Output with Internal Delays
â¢ÄThermally Compensated Current Monitoring
â¢ÄAutomatic Power Saving (AUTO PSI Mode)
â¢ÄCompatible to PSI Power Saving Requirements
â¢ÄThis is a Pb-Free Device
Applications
â¢ÄDesktop Processors
http://onsemi.com
MARKING
DIAGRAM
1 40
40 PIN QFN, 6x6
MN SUFFIX
CASE 488AR
1
NCP5392P
AWLYYWWG
NCP5392P = Specific Device
Code
A
= Assembly Location
WL
= Wafer Lot
YY
= Year
WW
= Work Week
G
= Pb-Free Package
*Pin 41 is the thermal pad on the bottom of the device.
ORDERING INFORMATION
Device
Package
Shippingâ
NCP5392PMNR2G* QFN-40 2500/Tape & Reel
(Pb-Free)
*Temperature Range: 0°C to 85°C
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
婀 Semiconductor Components Industries, LLC, 2008
1
April, 2008 - Rev. 0
Publication Order Number:
NCP5392P/D
|
▷ |