NCP5387 Datasheet, PDF (1/37 Pages) ON Semiconductor – 2/3/4 Phase Controller for CPU Applications

NCP5387
2/3/4 Phase Controller for
CPU Applications
The NCP5387 is a two−, three−, or four−phase buck controller
which combines differential voltage and current sensing, and
adaptive voltage positioning to power both AMD and Intel
processors. Dual−edge pulse−width modulation (PWM) combined
with inductor current sensing reduces system cost by providing the
fastest initial response to transient load events. Dual−edge
multi−phase modulation reduces total bulk and ceramic output
capacitance required to satisfy transient load−line regulation.
A high performance operational error amplifier is provided, which
allows easy compensation of the system. The proprietary method of
Dynamic Reference Injection (Patented) makes the error amplifier
compensation virtually independent of the system response to VID
changes, eliminating tradeoffs between overshoot and dynamic VID
performance.
Features
• Meets Intel’s VR 10.0 and 11.0 and AMD Specifications
• Dual−Edge PWM for Fastest Initial Response to Transient Loading
• High Performance Operational Error Amplifier
• Supports both VR11 and Legacy Soft−Start Modes
• Dynamic Reference Injection (Patented)
• DAC Range from 0.5 V to 1.6 V
• "0.5% System Voltage Accuracy from 1.0 V to 1.6 V
• True Differential Remote Voltage Sensing Amplifier
• Phase−to−Phase Current Balancing
• “Lossless” Differential Inductor Current Sensing
• Differential Current Sense Amplifiers for each Phase
• Adaptive Voltage Positioning (AVP)
• Frequency Range: 100 kHz – 1.0 MHz
• OVP with Resettable, 8 Event Delayed Latch
• Threshold Sensitive Enable Pin for VTT Sensing
• Power Good Output with Internal Delays
• Programmable Soft−Start Time
• This is a Pb−Free Device*
Applications
• Desktop Processors
http://onsemi.com
MARKING
DIAGRAM
1 40
40 PIN QFN, 6x6
MN SUFFIX
CASE 488AR
1
NCP5387
AAWLYYWW
G
NCP5387 = Specific Device Code
AA
= Assembly Location
WL
= Wafer Lot
YY
= Year
WW
= Work Week
G/G
= Pb−Free Package
*Pin 41 is the thermal pad on the bottom of the device.
ORDERING INFORMATION
Device
Package
Shipping^†
NCP5387MNR2G* QFN−40 2500 / Tape & Reel
(Pb−Free)
*Temperature Range: 0°C to 85°C
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques Reference
Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2007
1
April, 2007 − Rev. 3
Publication Order Number:
NCP5387/D