|
NCP5382 Datasheet, PDF (1/33 Pages) ON Semiconductor – 2/3/4/5/6 Phase Buck Controller for VR10 and VR11 Pentium IV Processor Applications | |||
|
NCP5382
2/3/4/5/6 Phase Buck
Controller for VR10 and
VR11 Pentium IV Processor
Applications
The NCP5382 is a twoâ, threeâ, fourâ, fiveâ, or sixâphase buck
controller which combines differential voltage and current sensing,
and adaptive voltage positioning to power Intelâs most demanding
Pentium® IV Processors and low voltage, high current power
supplies. Dualâedge pulseâwidth modulation (PWM) combined with
inductor current sensing reduces system cost by providing the fastest
initial response to transient loads thereby requiring less bulk and
ceramic output capacitors to satisfy transient loadâline requirements.
A high performance operational error amplifier is provided, which
allows easy compensation of the system. The proprietary method of
Dynamic Reference Injection (patented) makes the error amplifier
compensation virtually independent of the system response to VID
changes, eliminating the need for tradeoffs between load transients
and Dynamic VID performance.
Features
⢠Meets Intelâs VR 10.0, 10.1, 10.2, and 11.0 Specifications
⢠DualâEdge PWM for Fastest Initial Response to Transient Loading
⢠High Performance Operational Error Amplifier
⢠Supports both VR11 and Legacy VR10 SoftâStart Modes
⢠Dynamic Reference Injection (Patent# 7057381)
⢠8âBit DAC per Intelâs VR11 Specifications
⢠DAC Range from 0.5 V to 1.6 V
⢠"0.5% System Voltage Accuracy
⢠Remote Temperature Sensing per VR11
⢠2, 3, 4, 5 or 6âPhase Operation
⢠True Differential Remote Voltage Sensing Amplifier
⢠PhaseâtoâPhase Current Balancing
⢠âLosslessâ Differential Inductor Current Sensing
⢠Differential Current Sense Amplifiers for each Phase
⢠Adaptive Voltage Positioning (AVP)
⢠Fixed NoâLoad Voltage Positioning at â19 mV
⢠Frequency Range: 100 kHzâ1.0 MHz
⢠Threshold Sensitive Enable Pin for VTT Sensing
⢠Power Good Output with Internal Delays
⢠Programmable SoftâStart Time
⢠Operates from 12 V
⢠This is a PbâFree Device*
Applications
⢠Pentium IV Processors
⢠VRM Modules
⢠Graphics Cards
⢠Low Voltage, High Current Power Supplies
http://onsemi.com
1 48
48 PIN QFN, 7x7
MN SUFFIX
CASE 485K
MARKING
DIAGRAM
1
NCP5382
AWLYYWWG
A
= Assembly Location
WL = Wafer Lot
YY
= Year
WW = Work Week
G
= PbâFree Package
*Pin 49 is the thermal pad on the bottom of the device.
ORDERING INFORMATION
Device
Package
Shippingâ
NCP5382MNR2G QFNâ48 2500 / Tape & Reel
(PbâFree)
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
*For additional information on our PbâFree strategy
and soldering details, please download the
ON Semiconductor Soldering and Mounting
Techniques Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2007
1
March, 2007 â Rev. 0
Publication Order Number:
NCP5382/D
|
▷ |