|
NCP5322A_07 Datasheet, PDF (1/31 Pages) ON Semiconductor – Two−Phase Buck Controller with Integrated Gate Drivers and 5−Bit DAC | |||
|
NCP5322A
TwoâPhase Buck Controller
with Integrated Gate
Drivers and 5âBit DAC
The NCP5322A is a secondâgeneration, twoâphase step down
controller which incorporates all control functions required to power
high performance processors and high current power supplies.
Proprietary multiâphase architecture guarantees balanced load current
distribution and reduces overall solution cost in high current
applications. Enhanced V2⢠control architecture provides the fastest
possible transient response, excellent overall regulation, and ease of
use. The NCP5322A is a secondâgeneration PWM controller because
it optimizes transient response by combining traditional Enhanced V2
with an internal PWM ramp and fastâfeedback directly from VCORE to
the internal PWM comparator. These enhancements provide greater
design flexibility, facilitate use and reduce output voltage jitter.
The NCP5322A multiâphase architecture reduces output voltage
and input current ripple, allowing for a significant reduction in filter
size and inductor values with a corresponding increase in inductor
current slew rate. This approach allows a considerable reduction in
input and output capacitor requirements, as well as reducing overall
solution size and cost.
Features
⢠Enhanced V2 Control Method with Internal Ramp
⢠Internal PWM Ramp
⢠FastâFeedback Directly from VCORE
⢠5âBit DAC with 1.0% Accuracy
⢠Adjustable Output Voltage Positioning
⢠4 OnâBoard Gate Drivers
⢠200 kHz to 800 kHz Operation Set by Resistor
⢠Current Sensed through Buck Inductors or Sense Resistors
⢠Hiccup Mode Current Limit
⢠Individual Current Limits for Each Phase
⢠OnâBoard Current Sense Amplifiers
⢠3.3 V, 1.0 mA Reference Output
⢠5.0 V and/or 12 V Operation
⢠On/Off Control (through Soft Start Pin)
⢠Power Good Output with Internal Delay
⢠PbâFree Packages are Available
*For additional information on our PbâFree strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
http://onsemi.com
28
1
SOâ28L
DW SUFFIX
CASE 751F
PIN CONNECTIONS AND
MARKING DIAGRAM
1
COMP
VFB
VDRP
CS1
CS2
CSREF
PWRGD
VID0
VID1
VID2
VID3
VID4
ILIM
REF
28
ROSC
VCCL
VCCL1
GATE(L)1
GND
GATE(H)1
VCCH1
LGND
SS
VCCL2
GATE(L)2
GND2
GATE(H)2
VCCH2
A
= Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G
= PbâFree Package
ORDERING INFORMATION
Device
Package
Shippingâ
NCP5322ADW
NCP5322ADWG
SOâ28L
SOâ28L
(PbâFree)
26 Units/Rail
26 Units/Rail
NCP5322ADWR2 SOâ28L 1000 Tape & Reel
NCP5322ADWR2G SOâ28L 1000 Tape & Reel
(PbâFree)
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2007
1
January, 2007 â Rev. 5
Publication Order Number:
NCP5322A/D
|
▷ |