|
NCP5316 Datasheet, PDF (1/32 Pages) ON Semiconductor – Four/Five/Six-Phase Buck CPU Controller | |||
|
NCP5316
Four/Five/SixâPhase
Buck CPU Controller
The NCP5316 provides fullâfeatured and flexible control for the
latest highâperformance CPUs. The IC can be programmed as a fourâ,
fiveâ or sixâphase buck controller, and the perâphase switching
frequency can be as high as 1.0 MHz. Combined with external gate
drivers and power components, the controller implements a compact,
highly integrated multiâphase buck converter.
Enhanced V2⢠control inherently compensates for variations in
both line and load, and achieves current sharing between phases. This
control scheme provides fast transient response, reducing the need for
large banks of output capacitors and higher switching frequency.
The controller meets VR(M)10.x specifications with all the required
functions and protection features.
Features
⢠Switching Regulator Controller
⦠Programmable 4/5/6 Phase Operation
⦠Lossless Current Sensing
⦠Programmable Up to 1.0 MHz Switching Frequency Per Phase
⦠0 to 100% Adjustment of Duty Cycle
⦠Programmable Adaptive Voltage Positioning Reduces Output
Capacitor Requirements
⦠Programmable Soft Start
⢠Current Sharing
⦠Differential Current Sense Pins for Each Phase
⦠Current Sharing Within 10% Between Phases
⢠Protection Features
⦠Programmable PulseâbyâPulse Current Limit for Each Phase
⦠â111110â and â111111â DAC Code Fault
⦠Latching Off Overvoltage Protection
⦠Programmable Latch Overcurrent Protection
⦠Undervoltage Lockout
⦠Reference Undervoltage Lockout
⦠MOSFET Driver Control through DriverâOn Signal
⢠System Power Management
⦠6âBit DAC with 0.5% Tolerance
⦠Programmable Lower Power Good Threshold
⦠Power Good Output
⦠External Enable Control
⦠3.3 V Reference Voltage Output
http://onsemi.com
48âPIN QFN, 7 y 7
MN SUFFIX
CASE 485K
(Bottom View)
MARKING
DIAGRAMS
48
1
NCP5316
AWLYYWW
LQFPâ48
FT SUFFIX
CASE 932
NCP5316
AWLYYWW
48
1
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
ORDERING INFORMATION
Device
Package
Shippingâ
NCP5316MNR2 48âPin QFN* 2000 Tape & Reel
NCP5316FTR2 LQFPâ48* 2000 Tape & Reel
*7 Ã 7 mm
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2004
1
February, 2004 â Rev. 9
Publication Order Number
NCP5316/D
|
▷ |