NCP5304_14 Datasheet, PDF (1/16 Pages) ON Semiconductor – High Voltage, High and Low Side Driver

NCP5304
High Voltage, High and Low
Side Driver
The NCP5304 is a High Voltage Power gate Driver providing two
outputs for direct drive of 2 N−channel power MOSFETs or IGBTs
arranged in a half−bridge configuration.
It uses the bootstrap technique to insure a proper drive of the
High−side power switch. The driver works with 2 independent inputs
with cross conduction protection.
Features
• High Voltage Range: up to 600 V
• dV/dt Immunity ±50 V/nsec
• Negative Current Injection Characterized Over the Temperature Range
• Gate Drive Supply Range from 10 V to 20 V
• High and Low Drive Outputs
• Output Source / Sink Current Capability 250 mA / 500 mA
• 3.3 V and 5 V Input Logic Compatible
• Up to V_CC Swing on Input Pins
• Extended Allowable Negative Bridge Pin Voltage Swing to −10 V
for Signal Propagation
• Matched Propagation Delays between Both Channels
• Outputs in Phase with the Inputs
• Cross Conduction Protection with 100 ns Internal Fixed Dead Time
• Under V_CC LockOut (UVLO) for Both Channels
• Pin−to−Pin Compatible with Industry Standards
• These are Pb−Free Devices
Typical Applications
• Half−bridge Power Converters
• Full−bridge Converters
www.onsemi.com
1
SOIC−8
D SUFFIX
CASE 751
MARKING
DIAGRAMS
8
P5304
ALYW
G
1
1
PDIP−8
P SUFFIX
CASE 626
NCP5304
AWL
YYWWG
NCP5304 = Specific Device Code
A
= Assembly Location
L or WL = Wafer Lot
Y or YY = Year
W or WW = Work Week
G or G
= Pb−Free Package
PINOUT INFORMATION
IN_LO
IN_HI
VCC
GND
18
27
36
45
VBOOT
DRV_HI
BRIDGE
DRV_LO
8 Pin Package
ORDERING INFORMATION
Device
Package
Shipping^†
NCP5304PG
PDIP−8 50 Units / Rail
(Pb−Free)
NCP5304DR2G
SOIC−8 2500 / Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2014
1
November, 2014 − Rev. 7
Publication Order Number:
NCP5304/D