|
NCP512SQ13T1G Datasheet, PDF (1/9 Pages) ON Semiconductor – 80 mA CMOS Low Iq Voltage Regulator | |||
|
NCP512
80 mA CMOS Low Iq
Voltage Regulator
The NCP512 series of fixed output linear regulators are designed for
handheld communication equipment and portable battery powered
applications which require low quiescent. The NCP512 series features
an ultraâlow quiescent current of 40 mA. Each device contains a
voltage reference unit, an error amplifier, a PMOS power transistor,
resistors for setting output voltage, current limit, and temperature limit
protection circuits.
The NCP512 has been designed to be used with low cost ceramic
capacitors. The device is housed in the microâminiature SC70â5
surface mount package. Standard voltage versions are 1.3, 1.5, 1.8,
2.2, 2.5, 2.7, 2.8, 3.0, 3.1, 3.3, and 5.0 V. Other voltages are available
in 100 mV steps.
Features
⢠Low Quiescent Current of 40 mA Typical
⢠Low Dropout Voltage of 180 mV at 80 mA and 3.0 V Vout
⢠Low Output Voltage Option
⢠Output Voltage Accuracy of 2.0%
⢠Industrial Temperature Range of â40°C to 85°C
⢠These are PbâFree Devices
Typical Applications
⢠Cellular Phones
⢠Battery Powered Consumer Products
⢠HandâHeld Instruments
⢠Camcorders and Cameras
Battery or
Unregulated
Voltage
+
C1
1
5
2
ON
OFF
3
4
This device contains 86 active transistors
Vout
+
C2
Figure 1. Typical Application Diagram
http://onsemi.com
MARKING
DIAGRAM
SC70â5/SCâ88A/
5
SOTâ353
SQ SUFFIX
1
CASE 419A
xxx M G
G
xxx = Device Code
M = Date Code*
G = PbâFree Package
(Note: Microdot may be in either location)
*Date Code orientation and/or position may
vary depending upon manufacturing location.
PIN CONNECTIONS
Vin 1
GND 2
5 Vout
Enable 3
4 N/C
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
© Semiconductor Components Industries, LLC, 2009
1
June, 2009 â Rev. 15
Publication Order Number:
NCP512/D
|
▷ |