|
NCP51199 Datasheet, PDF (1/7 Pages) ON Semiconductor – DDR 2-Amp Source / Sink Termination Regulator | |||
|
NCP51199, NCV51199
DDR 2-Amp Source / Sink
VTT Termination Regulator
The NCP/NCV51199 is a linear regulator designed to supply a
regulated VTT termination voltage for DDRâ2 and DDRâ3 memory
applications. The regulator is capable of actively sourcing and sinking
±2 A peak currents for DDRâ2, and DDRâ3 up to ±1.5 A while
regulating the VTT output voltage to within ±10 mV. The output
termination voltage is regulated to track VDDQ / 2 by two external
voltage divider resistors connected to the PVCC, GND, and VREF pins.
The NCP/NCV51199 incorporates a highâspeed differential
amplifier to provide ultraâfast response to line and load transients.
Other features include source/sink current limiting, softâstart and
onâchip thermal shutdown protection.
Features
⢠Supports DDRâ2 VTT Termination to ±2 A, DDRâ3 to ±1.5 A (peak)
⢠Stable with 10 mF Ceramic Capacitance on VTT Output
⢠Integrated Power MOSFETs
⢠High Accuracy VTT Output at FullâLoad
⢠Fast Transient Response
⢠Builtâin SoftâStart
⢠Shutdown for Standby or Suspend Mode
⢠Integrated Thermal and CurrentâLimit Protection
⢠NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AECâQ100
Qualified and PPAP Capable
⢠These Devices are PbâFree and are RoHS Compliant
Typical Applications
⢠SDRAM Termination Voltage for DDRâ2 / DDRâ3
⢠Motherboard, Notebook, and VGA Card Memory Termination
⢠Set Top Box, Digital TV, Printers
http://onsemi.com
MARKING
DIAGRAM
8
8
1
SOIC8âNB EP
PD SUFFIX
CASE 751BU
XXXXXX
ALYW
G
1
XXXXXX = Specific Device Code
A
= Assembly Location
L
= Wafer Lot
Y
= Year
WW = Work Week
G
= PbâFree Package
PIN CONNECTION
1
PVCC
8
NC
GND
VREF
VTT
NC
VCC
NC
SOICâ8 EP
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 6 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
1
March, 2014 â Rev. 2
Publication Order Number:
NCP51199/D
|
▷ |