NCP511 Datasheet, PDF (1/12 Pages) ON Semiconductor – 150 mA CMOS Low Iq Low-Dropout Voltage Regulator

NCP511
150 mA CMOS Low Iq
Low−Dropout Voltage
Regulator
The NCP511 series of fixed output low dropout linear regulators are
designed for handheld communication equipment and portable battery
powered applications which require low quiescent current. The
NCP511 series features an ultra−low quiescent current of 40 mA. Each
device contains a voltage reference unit, an error amplifier, a PMOS
power transistor, resistors for setting output voltage, current limit, and
temperature limit protection circuits.
The NCP511 has been designed to be used with low cost ceramic
capacitors and requires a minimum output capacitor of 1.0 mF. The
device is housed in the micro−miniature TSOP−5 surface mount
package. Standard voltage versions are 1.5 V, 1.8 V, 2.5 V, 2.7 V, 2.8 V,
3.0 V, 3.3 V, and 5.0 V. Other voltages are available in 100 mV steps.
Features
• Low Quiescent Current of 40 mA Typical
• Low Dropout Voltage of 100 mV at 100 mA
• Excellent Line and Load Regulation
• Maximum Operating Voltage of 6.0 V
• Low Output Voltage Option
• High Accuracy Output Voltage of 2.0%
• Industrial Temperature Range of −40°C to 85°C
• Pb−Free Packages are Available
Typical Applications
• Cellular Phones
• Battery Powered Instruments
• Hand−Held Instruments
• Camcorders and Cameras
http://onsemi.com
5
1
TSOP−5
(SOT23−5, SC59−5)
SN SUFFIX
CASE 483
PIN CONNECTIONS AND
MARKING DIAGRAM
V_in 1
GND 2
Enable 3
5 V_out
4 N/C
xxx = Version
Y = Year
W = Work Week
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 10 of this data sheet.
V_in
1
Thermal
Shutdown
Driver w/
Current
Limit
Enable
ON ³
OFF
GND 2
This device contains 82 active transistors
Figure 1. Representative Block Diagram
V_out
5
© Semiconductor Components Industries, LLC, 2004
1
March, 2004 − Rev. 9
Publication Order Number:
NCP511/D