NCP5104_15 Datasheet, PDF (1/15 Pages) ON Semiconductor – High Voltage, Half Bridge Driver

NCP5104, NCV5104
High Voltage, Half Bridge
Driver
The NCP5104 is a High Voltage Power gate Driver providing two
outputs for direct drive of 2 N−channel power MOSFETs or IGBTs
arranged in a half−bridge configuration. It uses the bootstrap
technique to insure a proper drive of the High−side power switch.
Features
• High Voltage Range: up to 600 V
• dV/dt Immunity ±50 V/nsec
• Gate Drive Supply Range from 10 V to 20 V
• High and Low Drive Outputs
• Output Source / Sink Current Capability 250 mA / 500 mA
• 3.3 V and 5 V Input Logic Compatible
• Up to V_CC Swing on Input Pins
• Extended Allowable Negative Bridge Pin Voltage Swing to −10 V
for Signal Propagation
• Matched Propagation Delays between Both Channels
• 1 Input with Internal Fixed Dead Time (520 ns)
• Under V_CC LockOut (UVLO) for Both Channels
• Pin to Pin Compatible with Industry Standards
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Typical Applications
• Half−Bridge Power Converters
www.onsemi.com
1
SOIC−8
D SUFFIX
CASE 751
MARKING
DIAGRAMS
8
P5104
ALYW
G
1
1
PDIP−8
P SUFFIX
CASE 626
NCP5104
AWL
YYWWG
NCP5104
A
L or WL
Y or YY
W or WW
G or G
= Specific Device Code
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
PINOUT INFORMATION
VCC
IN
SD
GND
18
27
36
45
VBOOT
DRV_HI
BRIDGE
DRV_LO
8 Pin Package
ORDERING INFORMATION
Device
Package
Shipping^†
NCP5104PG
PDIP−8
(Pb−Free)
50 Units / Rail
NCP5104DR2G SOIC−8 2500 / Tape & Reel
(Pb−Free)
NCV5104DR2G SOIC−8 2500 / Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2015
1
June, 2015 − Rev. 7
Publication Order Number:
NCP5104/D