English
Language : 

NCP500_15 Datasheet, PDF (1/18 Pages) ON Semiconductor – 150 mA CMOS Low Noise Low-Dropout Voltage Regulator
NCP500, NCV500
150 mA CMOS Low Noise
Low-Dropout Voltage
Regulator
The NCP500 series of fixed output low dropout linear regulators are
designed for portable battery powered applications which require low
noise operation, fast enable response time, and low dropout. The
device achieves its low noise performance without the need of an
external noise bypass capacitor. Each device contains a voltage
reference unit, an error amplifier, a PMOS power transistor, and
resistors for setting output voltage, and current limit and temperature
limit protection circuits.
The NCP500 has been designed to be used with low cost ceramic
capacitors and requires a minimum output capacitor of 1.0 mF.
Features
• Ultra−Low Dropout Voltage of 170 mV at 150 mA
• Fast Enable Turn−On Time of 20 msec
• Wide Operating Voltage Range of 1.8 V to 6.0 V
• Excellent Line and Load Regulation
• High Accuracy Output Voltage of 2.5%
• Enable Can Be Driven Directly by 1.0 V Logic
• Typical RMS Noise Voltage 50 mV with No Bypass Capacitor
(BW = 10 Hz to 100 kHz)
• Very Small DFN 2x2.2 Package
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These are Pb−Free Devices
Typical Applications
• Noise Sensitive Circuits − VCO’s, RF Stages, etc.
• SMPS Post−Regulation
• Hand−Held Instrumentation
• Camcorders and Cameras
Vin
1 (3)
Thermal
Shutdown
Driver w/
Current
Limit
Enable
ON 3 (1)
Vout
5 (4)
OFF
GND 2 (2, 5)
NOTE: Pin numbers in parenthesis indicate DFN package.
Figure 1. Simplified Block Diagram
www.onsemi.com
5
1
TSOP−5
SN SUFFIX
CASE 483
6
1
DFN 2x2.2 MM
SQL SUFFIX
CASE 506BA
PIN CONNECTIONS AND
MARKING DIAGRAMS
TSOP−5
Vin 1
GND 2
5 Vout
Enable 3
4 N/C
(Top View)
xxx = Specific Device Code
A = Assembly Location
Y = Year
W = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
DFN 2x2.2 mm
Enable 1
6 N/C
GND 2 xxM 5 GND
Vin 3
4 Vout
(Top View)
xx = Specific Device Code
M = Date Code
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 16 of this data sheet.
© Semiconductor Components Industries, LLC, 2015
1
June, 2015 − Rev. 22
Publication Order Number:
NCP500/D