|
NCP4894 Datasheet, PDF (1/18 Pages) ON Semiconductor – 1.8 Watt Differential Audio Power Amplifier with Selectable Shutdown | |||
|
NCP4894
1.8 Watt Differential Audio
Power Amplifier with
Selectable Shutdown
The NCP4894 is a differential audio power amplifier designed for
portable communication device applications. This feature and the
excellent audio characteristics of the NCP4894 are a guarantee of a
high quality sound, for example, in mobile phones applications. With
a 10% THD+N value the NCP4894 is capable of delivering 1.8 W of
continuous average power to an 8.0 W load from a 5.5 V power
supply. With the same load conditions and a 5.0 V battery voltage, it
ensures 1.0 W to be delivered with less than 0.01% distortion.
The NCP4894 provides high quality audio while requiring few
external components and minimal power consumption. It features a
lowâpower consumption shutdown mode.
To be flexible, shutdown may be enabled by either a logic high or
low depending on the voltage applied on the SD MODE pin.
The NCP4894 contains circuitry to prevent from âpop and clickâ
noise that would otherwise occur during turnâon and turnâoff
transitions.
For maximum flexibility, the NCP4894 provides an externally
controlled gain (with resistors), as well as an externally controlled
turnâon time (with bypass capacitor).
Due to its excellent PSRR, it can be directly connected to the
battery, saving the use of an LDO.
This device is available in 9âPin FlipâChip, Microâ10 and DFN10
3x3 mm packages.
Features
⢠Differential Amplification
⢠Shutdown High or Low Selectivity
⢠1.0 W to an 8.0 W Load from a 5.0 V Power Supply
⢠Superior PSRR: Direct Connection to the Battery
⢠âPop and Clickâ Noise Protection Circuit
⢠Ultra Low Current Shutdown Mode
⢠2.2 Vâ5.5 V Operation
⢠External Gain Configuration Capability
⢠External Turnâon Configuration Capability
⢠Thermal Overload Protection Circuitry
⢠PbâFree Packages are Available
Typical Applications
⢠Portable Electronic Devices
⢠PDAs
⢠Mobile Phones
http://onsemi.com
MARKING
DIAGRAMS
1
9âPIN FLIPâCHIP
FC SUFFIX
CASE 499AL
A3
xxxG
AYWW
C1
A1
8
1
Microâ10
DM SUFFIX
CASE 846B
xxxx
AYWG
G
DFN10
1
MN SUFFIX
xxx
CASE 485C
ALYWG
1
G
xxxx = Specific Device Code
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W, WW = Work Week
G
= PbâFree Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 14 of this data sheet.
© Semiconductor Components Industries, LLC, 2005
1
November, 2005 â Rev. 8
Publication Order Number:
NCP4894/D
|
▷ |