NCP4683_16 Datasheet, PDF (1/21 Pages) ON Semiconductor – 300 mA, Low Dropout Regulator

NCP4683
300 mA, Low Dropout
Regulator
The NCP4683 is a CMOS Linear voltage regulator with 300 mA
output current capability. The device has high output voltage accuracy,
low supply current and high ripple rejection. The NCP4683 is easy to
use, with output current fold−back protection circuit included. A Chip
Enable function is included to save power by lowering supply current.
The line and load transient responses are very good, thus this regulator
is suitable for use as a power supply for communication equipment.
Features
• Operating Input Voltage Range: 1.40 V to 5.25 V
• Output Voltage Range: 0.8 V to 3.6 V (available in 0.1 V steps)
• Output Voltage Accuracy: ±1.0% (V_OUT > 2.0 V)
• Supply Current: 50 mA
• Dropout Voltage: 0.25 V (I_OUT = 300 mA, V_OUT = 2.8 V)
• High PSRR: 70 dB (f = 1 kHz)
• Line Regulation: 0.02%/V Typ.
• Stable with Ceramic Capacitors: 1.0 mF or more
• Current Fold Back Protection
• Available in UDFN4 1.0 x 1.0 mm, SC−70, SOT23 Packages
• These are Pb−Free Devices
Typical Applications
• Battery−powered Equipment
• Networking and Communication Equipment
• Cameras, DVRs, STB and Camcorders
• Home Appliances
VIN
C1
1m
NCP4683x
VIN
VOUT
CE
GND
VOUT
C2
1m
www.onsemi.com
MARKING
DIAGRAMS
SOT−23−5
CASE 1212
XXX
M
SC−70
CASE 419A
XXX
XMM
1
UDFN4
CASE 517BR
XX
MM
1
XX, XXX, XXXX = Specific Device Code
M, MM
= Date Code
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 18 of this data sheet.
Figure 1. Typical Application Schematic
© Semiconductor Components Industries, LLC, 2016
1
February, 2016 − Rev. 3
Publication Order Number:
NCP4683/D