NCP435 Datasheet, PDF (1/10 Pages) ON Semiconductor – 2A Ultra-Small Controlled Load Switch

NCP434, NCP435
2A Ultra-Small Controlled
Load Switch with
Auto-Discharge Path
The NCP434 and NCP435 are a low Ron MOSFET controlled by
external logic pin, allowing optimization of battery life, and portable
device autonomy.
Indeed, due to a current consumption optimization with PMOS
structure, leakage currents are eliminated by isolating connected IC’s
on the battery when not used.
Output discharge path is also embedded to eliminate residual
voltages on the output (NCP435 only).
Available in wide input voltage range from 1.0 V to 4.0 V, and a very
small 0.96 x 0.96 mm WLCSP4, 0.5 mm pitch.
Features
• 1 V − 3.6 V Operating Range
• 29 mW P MOSFET at 3.3 V
• DC current up to 2 A
• Output Auto−discharge (NCP435)
• Active high EN pin
• WLCSP4 0.96 x 0.96 mm
• These are Pb−Free Devices
Typical Applications
• Mobile Phones
• Tablets
• Digital Cameras
• GPS
• Portable Devices
www.onsemi.com
WLCSP4
CASE 567FG
MARKING
DIAGRAM
1
XX
AYW
XX
= Specific Device Code
A
= Assembly Location
Y
= Year
W
= Wafer Lot
PIN DIAGRAM
1
2
A OUT
IN
B GND
EN
(Top View)
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 9 of this data sheet.
V+
DCDC Converter
or
LDO
LS
NCP435
A2
A1
IN OUT
B2 _{EN GND} B1
Platform IC’n
ENx
EN
0
Figure 1. Typical Application Circuit
© Semiconductor Components Industries, LLC, 2013
1
August, 2016 − Rev. 5
Publication Order Number:
NCP435/D