NCP380HMUAJAATBG Datasheet, PDF (1/24 Pages) ON Semiconductor – Fixed / Adjustable Current-Limiting Power-Distribution Switches

NCP380, NCV380
Fixed / Adjustable Current-
Limiting Power-Distribution
Switches
The NCP380 is a high side power−distribution switch designed for
applications where heavy capacitive loads and short−circuits are likely
to be encountered. The device includes an integrated 55 mW (DFN
package), P−channel MOSFET. The device limits the output current to
a desired level by switching into a constant−current regulation mode
when the output load exceeds the current−limit threshold or a short is
present. The current−limit threshold is either user adjustable between
100 mA and 2.1 A via an external resistor or internally fixed. The
power−switch rise and fall times are controlled to minimize current
ringing during switching.
An internal reverse−voltage detection comparator disables the
power−switch if the output voltage is higher than the input voltage to
protect devices on the input side of the switch.
The FLAG logic output asserts low during over current,
reverse−voltage or over temperature conditions. The switch is
controlled by a logic enable input active high or low.
Features
• 2.5 V – 5.5 V Operating Range
• 70 mW High−Side MOSFET
• Current Limit:
♦ User adjustable from 100 mA to 2.1 A
♦ Fixed 500 mA, 1 A, 1.5 A, 2 A and 2.1 A
• Under Voltage Lock−out (UVLO)
• Built−in Soft−start
• Thermal Protection
• Soft Turn−off
• Reverse Voltage Protection
• Junction Temperature Range: −40°C to 125°C
• Enable Active High or Low (EN or EN)
• Compliance to IEC61000−4−2 (Level 4)
♦ 8.0 kV (Contact)
♦ 15 kV (Air)
• UL Listed − File No. E343275
• AEC−Q100 Qualified and PPAP Capable
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements
• These are Pb−Free Devices
Typical Applications
• Laptops
• USB Ports/Hubs
• TVs
http://onsemi.com
MARKING
DIAGRAMS
UDFN6
MU SUFFIX
CASE 517AB
1
6
2 _{XX M} 5
3
4
5
1
TSOP−5
SN SUFFIX
CASE 483
5
XXXAYWG
G
1
1
TSOP−6
SN SUFFIX
CASE 318G
XXXAYWG
G
1
XXX = Specific Device Code
A =Assembly Location
M = Date Code
Y = Year
W = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 21 of this data sheet.
© Semiconductor Components Industries, LLC, 2012
1
February, 2012 − Rev. 10
Publication Order Number:
NCP380/D