NCP348 Datasheet, PDF (1/12 Pages) ON Semiconductor – Positive Overvoltage Protection Controller with Internal Low R_ON NMOS FET and Status FLAG

NCP348
Positive Overvoltage
Protection Controller with
Internal Low R_ON NMOS FET
and Status FLAG
The NCP348 is able to disconnect the systems from its output pin
in case wrong input operating conditions are detected. The system is
positive overvoltage protected up to +28 V.
Due to this device using internal NMOS, no external device is
necessary, reducing the system cost and the PCB area of the
application board.
The NCP348 is able to instantaneously disconnect the output from
the input, due to integrated Low R_ON Power NMOS (65 mW), if the
input voltage exceeds the overvoltage threshold (6.4 V) or
undervoltage threshold, of 3.25 V (UVLO).
At powerup (EN pin = low level), the V_out turns on 50 ms after the
V_in exceeds the undervoltage threshold.
The NCP348 provides a negative going flag (FLAG) output, which
alerts the system that a fault has occurred.
In addition, the device has ESD−protected input (15 kV Air) when
bypassed with a 1.0 mF or larger capacitor.
Features
• Overvoltage Protection up to 28 V
• On−Chip Low R_DS(on) NMOS Transistor: 65 mW
• Internal Charge Pump
• Overvoltage Lockout (OVLO)
• Undervoltage Lockout (UVLO)
• Internal 50 ms Startup Delay
• Alert FLAG Output
• Shutdown EN Input
• Compliance to IEC61000−4−2 (Level 4)
8.0 kV (Contact)
15 kV (Air)
• ESD Ratings: Machine Model = B
Human Body Model = 3
• 10 Lead WDFN 2.5x2 mm Package
• This is a Pb−Free Device
Applications
• Cell Phones
• Camera Phones
• Digital Still Cameras
• Personal Digital Applications
• MP3 Players
http://onsemi.com
MARKING
DIAGRAM
WDFN10
MT SUFFIX
CASE 516AA
BAIM
G
BAI = Specific Device Code
M = Date Code
G = Pb−Free Package
PIN CONNECTIONS
IN 1
GND 2
FLAG 3
PAD1
GND
10 EN
9 NC
8 NC
IN 4
IN 5
PAD2
IN
7 OUT
6 OUT
(Top View)
ORDERING INFORMATION
Device
Package
Shipping
NCP348MTTBG WDFN−10 3000 / Tape & Reel
(Pb−Free)
NCP348MTTXG WDFN−10 10000 / Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2006
1
November, 2006 − Rev. 2
QFN−16
Publication Order Number:
NCP348/D