NCP338_16 Datasheet, PDF (1/8 Pages) ON Semiconductor – 2A Ultra-Small Controlled Load Switch

NCP338
2A Ultra-Small Controlled
Load Switch with
Auto-discharge Path
The NCP338 is very low Ron MOSFET controlled by external logic
pin, allowing optimization of battery life, and portable device
autonomy.
Indeed, due to a current consumption optimization with PMOS
structure, leakage currents are eliminated by isolating connected IC on
the battery when not used.
Output discharge path is also embedded to eliminate residual
voltages on the output rail.
Proposed in a wide input voltage range from 1.0 V to 3.6 V, in a
small 0.8 x 1.2 mm WLCSP6, pitch 0.4 mm.
Features
• 1.0 V − 3.6 V Operating Range
• 16 mW P MOSFET at 3.6 V
• DC Current Up to 2 A
• Output Auto−discharge
• Active High EN Pin
• WLCSP6 0.8 x 1.2 mm
• ESD Ratings: 6 kV HBM, 250 V MM
• This is a Pb−Free Device
Typical Applications
• Mobile Phones
• Tablets
• Digital Cameras
• GPS
• Portable Devices
www.onsemi.com
MARKING
DIAGRAM
WLCSP6
CASE 567FY
AM
AYW
AM = Specific Device Code
A = Assembly Location
Y = Year
W = Work Week
PIN DIAGRAM
1
2
A _OUT
IN
B OUT
IN
C GND
EN
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
V+
DCDC Converter
or
LDO
LS
NCP338
A2
B2
IN OUT
IN OUT
A1
B1
C2
EN
Platform IC’n
ENx
EN
0
Figure 1. Typical Application Circuit
© Semiconductor Components Industries, LLC, 2013
1
August, 2016 − Rev. 3
Publication Order Number:
NCP338/D