NCP3335_06 Datasheet, PDF (1/9 Pages) ON Semiconductor – Ultra High Accuracy, Low Iq, 500 mA Low Dropout Regulator

NCP3335
Ultra High Accuracy,
Low Iq, 500 mA
Low Dropout Regulator
The NCP3335 is a high performance, low dropout regulator. With
accuracy of ±0.9% over line and load and ultra−low quiescent current
and noise it encompasses all of the necessary features required by
today’s consumer electronics. This unique device is guaranteed to be
stable without a minimum load current requirement and stable with
any type of capacitor as small as 1.0 mF. The NCP3335 also comes
equipped with sense and noise reduction pins to increase the overall
utility of the device.
Features
• High Accuracy Over Line and Load (+0.9% at 255C)
• Ultra−Low Dropout Voltage at Full Load (260 mV typ.)
• No Minimum Output Current Required for Stability
• Low Noise (35 mVrms w/ 10 nF C_nr and 56 mVrms w/out C_nr)
• Low Shutdown Current (0.07 mA)
• 2.6 V to 12 V Supply Range
• Thermal Shutdown Protection
• Current Limitation
• Requires Only 1.0 mF Output Capacitance for Stability
• Stable with Any Type of Capacitor (including MLCC)
• Available in 2.5 V, 2.85 V, and 3.3 V Output Voltages
• These are Pb−Free Devices
Applications
• PCMCIA Card
• Cellular Phones
• Camcoders and Cameras
• Networking Systems, DSL/Cable Modems
• Cable Set−Top Box
• MP3/CD Players
• DSP Supply
• Displays and Monitors
http://onsemi.com
Micro8]
DMR2 SUFFIX
CASE 846A
QFN10
MN SUFFIX
CASE 485C
MARKING DIAGRAM
8
xxxx
AYWG
G
1
Pin 1,2. V_out
3. Sense
4. GND
5. NR
6. SD (Shutdown)
7,8. V_in
3335
ALYWG
G
Pin 1,2. V_out
3. Sense
4. GND
5,6. NC
7. NR
8. SD
9,10. V_in
xxx = LHX for 2.5 V
= LHY for 2.85 V
= LHZ for 3.3 V
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
© Semiconductor Components Industries, LLC, 2006
1
September, 2006 − Rev. 5
Publication Order Number:
NCP3335/D