|
NCP1603 Datasheet, PDF (1/30 Pages) ON Semiconductor – PFC/PWM Combo Controller with Integrated High Voltage Startup and Standby Capability | |||
|
NCP1603
PFC/PWM Combo Controller
with Integrated High
Voltage Startup and Standby
Capability
The NCP1603 is a Power Factor Correction (PFC) and Pulse Width
Modulation (PWM) combo controller. It offers extremely low
noâload standby power consumption that is suitable for the
lowâpower consumer markets. The key features of the device are
listed below.
Features
⢠PbâFree Package is Available*
PFC Features
⢠NearâUnity Power Factor in Discontinuous and Critical Mode
(DCM and CRM)
⢠VoltageâMode Operation
⢠Low Startup and Shutdown Current Consumption
⢠Programmable Switching Frequency for DCM
⢠Synchronization Capability
⢠Overvoltage Protection (107% of Nominal Output Level)
⢠Undervoltage Protection or Shutdown
(8% of Nominal Output Level)
⢠Programmable Overcurrent Protection
⢠Thermal Shutdown with Hysteresis (95/140°C)
⢠Undervoltage Lockout with Hysteresis (9.0/10.5 V)
PWM Features
⢠Integrated Lossless High Voltage Startup Current Source
⢠100 kHz PWM CurrentâMode Operation with Skipping Cycle
Capability During Standby Condition
⢠PFC Bias Voltage is Disabled in Standby Condition to Achieve
Extremely Low NoâLoad Standby Power Consumption
⢠Fault Protection Implemented by a Timer and Independent of Badly
Coupled Auxiliary Transformer Winding
⢠Primary Overcurrent Protection and Latched Overvoltage Protection
⢠Internal 2.5 ms SoftâStart
⢠"6.4% Frequency Jittering for Improved EMI Performance
⢠Latched Thermal Shutdown with Hysteresis (140/165°C)
⢠Undervoltage Lockout with Hysteresis (5.6/7.7/12.6 V)
Applications
⢠Notebook Adapters
⢠TV/Monitors
http://onsemi.com
MARKING
DIAGRAM
16
1
SOâ16
D SUFFIX
CASE 751B
1603D100G
AWLYWW
1
A = Assembly Location
WL = Wafer Lot
Y = Year
WW = Work Week
G = PbâFree Package
PIN CONNECTIONS
Vaux 1
FB2 2
CS2 3
GND2 4
Osc 5
GND1 6
Out1 7
VCC1 8
(Top View)
16 HV
15 NC
14 VCC2
13 Out2
12 Ramp
11 CS1
10 Vcontrol
9 FB1
ORDERING INFORMATION
Device
Package Shippingâ
NCP1603D100R2 SOâ16 2500 Tape & Reel
NCP1603D100R2G SOâ16 2500 Tape & Reel
(PbâFree)
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
*For additional information on our PbâFree strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques Reference
Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
1
April, 2006 â Rev. 8
Publication Order Number:
NCP1603/D
|
▷ |