|
NCP1600 Datasheet, PDF (1/23 Pages) ON Semiconductor – High Voltage PFC Controller | |||
|
NCP1600
High Voltage PFC Controller
with Standby Power Saving
The NCP1600 is an active power factor correction controller that
operates as a boost preâconverter in offâline power supply
applications. NCP1600 is optimized for low to medium power,
highâdensity power supplies requiring a minimum board area,
reduced component count and low power dissipation. Two
comparators are built into this device to improve standby (power)
efficiency. With these two comparators, the PFC controller
automatically switches itself in between normal mode and standby
mode (skip or off mode) to save power consumption during light load
conditions.
The NCP1600 can achieve deliver followâboost operation that is
an innovative mode allowing a drastic size reduction of both the
inductor and the power switch. Ultimately, the solution system cost is
significantly lowered. NCP1600 can also work in a traditional
constant output voltage mode and intermediate solutions can be
easily implemented. This flexibility makes it ideal to optimally cope
with a wide range of applications.
Features
⢠Lose Less HighâVoltage Startup Source
⢠Standard Constant Output Voltage or âFollowâBoostâ Mode
⢠PFC Skip Mode and Off Mode under Light Load Conditions
⢠Selectable Switching Frequency Clamp
⢠Disable Pin to Stop PFC Operation
⢠Restart Delay Timer
⢠Brownâout Protection for Startup
⢠Feedback Loop Open Detection
⢠Output Overvoltage Comparator
⢠Switch Mode Operation: Voltage Mode
⢠Constant OnâTime Operation That Saves the Use of an Extra
Multiplier
⢠Improved Regulation Block Dynamic Behavior
⢠Internally Trimmed Reference Current Source
⢠Internal Leading Edge Blanking (LEB) for Noise Immunity
Typical Applications
⢠Monitor/TV Power Supplies
⢠PC Power Supplies
⢠Notebook PC Adapters
⢠Medium Power Adapters
http://onsemi.com
MARKING
DIAGRAM
16
1
SOâ16
D SUFFIX
CASE 751B
NCP1600
AWLYWW
A = Assembly Location
WL = Wafer Lot
Y = Year
WW = Work Week
PIN CONNECTIONS
AGND 1
VREF 2
RD 3
FB_In 4
CS 5
Mir_Out 6
Vth 7
STB 8
16 Line
15 NC
14 FC
13 VCON
12 CT
11 VCC
10 Gate
9 PGND
(Top View)
ORDERING INFORMATION
Device
Package
Shipping
NCP1600D
SOâ16 48 Units / Rail
© Semiconductor Components Industries, LLC, 2006
1
July, 2006 â Rev. 2
Publication Order Number:
NCP1600/D
|
▷ |