|
NCP1592 Datasheet, PDF (1/20 Pages) ON Semiconductor – 6A Output Synchronous Buck PWM Switcher | |||
|
NCP1592
3 V to 6 V Input, 6 A Output
Synchronous Buck PWM
Switcher with Integrated
FETs
NCP1592 is a low input voltage 6 A synchronous buck converter
that integrates both 30 mW high side and low side MOSFETs.
NCP1592 is designed for space sensitive and high efficiency
applications. The main features include: a high performance voltage
error amplifier; an underâvoltageâlockout circuit to prevent startâup
until the input voltage reaches 3 V; an internally or externally
programmable softâstart circuit to limit inrush currents; and a power
good output monitor signal. NCP1592 is available in thermally
enhanced 28âpin TSSOP package.
http://onsemi.com
MARKING
DIAGRAM
TSSOPâ28 EP
CASE 948BG
1592G
ALYW
Features
⢠30 mW, 12 A Peak MOSFET Switches for High to Efficiency at 6 A
Continuous Output Source or Sink Current
⢠Adjustable Output Voltage Down to 0.891 V With 1.0% Accuracy
⢠Wide PWM Frequency: Fixed 350 kHz, 550 kHz or Adjustable
280 kHz to 700 kHz
⢠Synchronizable to 700 kHz
⢠Load Protected by Peak Current Limit and Thermal Shutdown
⢠Integrated Solution Reduces Board Area and Component Count
⢠This is a PbâFree Device
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = PbâFree Package
Application
⢠LowâVoltage, HighâDensity Distributed Power Systems
⢠High Performance Point of Load Regulation for DSPs, FPGAs,
ASICs and Microprocessors
⢠Broadband, Networking and Optical Communications Infrastructure
⢠Portable Computing/Notebook PCs
Input
VIN
PH
NCP1592
BOOT
Output
VI = 5 V,
VO = 3.3 V
LOAD CURRENT (A)
Figure 1. Efficiency at 350 kHz
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 18 of this data sheet.
PGND
VBIAS
VSENSE
AGND COMP
Figure 2. Typical Application Circuit
© Semiconductor Components Industries, LLC, 2014
1
April, 2014 â Rev. 2
Publication Order Number:
NCP1592/D
|
▷ |