|
NCP1589C Datasheet, PDF (1/10 Pages) ON Semiconductor – Low Voltage Synchronous Buck Controller | |||
|
NCP1589C
Low Voltage Synchronous
Buck Controller
The NCP1589C is a low cost PWM controller designed to operate
from a 5 V or 12 V supply. This device is capable of producing an
output voltage as low as 0.8 V. This device is capable of converting
voltage from as low as 2.5 V. This 10âpin device provides an optimal
level of integration to reduce size and cost of the power supply.
Features include a 1.5 A gate driver design and an internally set
300 kHz oscillator. In addition to the 1.5 A gate drive capability, other
efficiency enhancing features of the gate driver include adaptive
nonâoverlap circuitry. The NCP1589C also incorporates an externally
compensated error amplifier. Protection features include
programmable short circuit protection and undervoltage lockout
(UVLO).
Features
⢠VCC Range from 4.5 V to 13.2 V
⢠300 kHz Internal Oscillator
⢠Boost Pin Operates to 30 V
⢠Voltage Mode PWM Control
⢠Precision 0.8 V Internal Reference
⢠Adjustable Output Voltage
⢠Internal 1.5 A Gate Drivers
⢠80% Max Duty Cycle
⢠Input Under Voltage Lockout
⢠Programmable Current Limit
⢠This is a PbâFree Device
Applications
⢠Graphics Cards
⢠Desktop Computers
⢠Servers / Networking
⢠DSP & FPGA Power Supply
⢠DCâDC Regulator Modules
http://onsemi.com
MARKING DIAGRAM
DFN10
CASE 485C
1589C
ALYWG
G
1589C
A
L
Y
W
G
= Specific Device Code
= Assembly Location
= Wafer Lot
= Year
= Work Week
= PbâFree Device
(Note: Microdot may be in either location)
PIN CONNECTIONS
BOOT 1
LX 2
UG 3
LG 4
GND 5
10 PGOOD
9 VOS
8 FB
7 COMP/EN
6 VCC
(Top View)
ORDERING INFORMATION
Device
Package
Shippingâ
NCP1589CMNTWG DFN10
3000 /
(PbâFree) Tape & Reel
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2011
1
November, 2011 â Rev. 1
Publication Order Number:
NCP1589C/D
|
▷ |