|
NCP1575 Datasheet, PDF (1/16 Pages) ON Semiconductor – Low Voltage Synchronous Buck Controller with Adjustable Switching Frequency | |||
|
NCP1575
Low Voltage Synchronous
Buck Controller with
Adjustable Switching
Frequency
The NCP1575 is a low voltage buck controller. It provides the
control for a DCâDC power solution producing an output voltage as
low as 0.980 V over a wide current range. It contains all required
circuitry for a synchronous NFET buck regulator using the V2t
control method to achieve the fastest possible transient response and
best overall regulation. The NCP1575 operates at a default switching
frequency of 200 kHz, but switching frequency is userâprogrammable
with an additional resistor between ROSC and ground. This device
provides undervoltage lockout protection, softâstart, and builtâin
adaptive nonoverlap and is assembled in an SOICâ8 package.
The NCP1575âbased solution requires a bias supply of 12 V, and it
can convert from a bulk power supply ranging from 2 V to 12 V.
Conversion from bulk supplies greater than 7 V is best accomplished
by using an external doubler circuit to raise the enhancement voltage
for the external NFET switches.
Features
⢠PbâFree Packages are Available
⢠0.980 V ±1.0% Reference Voltage
⢠V2 Control Topology
⢠200 ns Transient Response
⢠Programmable SoftâStart
⢠40 ns Gate Rise and Fall Times (3.3 nF Load)
⢠Adaptive FET Nonoverlap Time
⢠Default 200 kHz Oscillator Frequency (No External
Resistor Required)
⢠UserâProgrammable Oscillator Frequency (One External
Resistor Required)
⢠Undervoltage Lockout
⢠On/Off Control Through Use of the COMP Pin
⢠Overvoltage Protection through Synchronous MOSFETs
⢠Synchronous NâChannel Buck Design
⢠â12 V Onlyâ or Dual Supply Operation
http://onsemi.com
8
1
SOICâ8
D SUFFIX
CASE 751
MARKING
DIAGRAM
8
1575
ALYW
1
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
PIN CONNECTIONS
1
VCC
ROSC
NC
COMP
8
GND
VFB
GATE(L)
GATE(H)
ORDERING INFORMATION
Device
Package
Shippingâ
NCP1575D
NCP1575DG
SOICâ8
SOICâ8
(PbâFree)
98 Units/Rail
98 Units/Rail
NCP1575DR2 SOICâ8
NCP1575DR2G SOICâ8
(PbâFree)
2500 Tape & Reel
2500 Tape & Reel
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2004
1
November, 2004 â Rev. 6
Publication Order Number
NCP1575/D
|
▷ |