NCP1340_16 Datasheet, PDF (1/39 Pages) ON Semiconductor – High-Voltage Quasi-Resonant, Controller Featuring Valley Lock-Out Switching

NCP1340
High-Voltage,
Quasi-Resonant, Controller
Featuring Valley Lock-Out
Switching
The NCP1340 is a highly integrated quasi−resonant flyback
controller suitable for designing high−performance off−line power
converters. With an integrated active X2 capacitor discharge feature,
the NCP1340 can enable no−load power consumption below 30 mW.
The NCP1340 features a proprietary valley−lockout circuitry,
ensuring stable valley switching. This system works down to the 6^th
valley and transitions to frequency foldback mode to reduce switching
losses. As the load decreases further, the NCP1340 enters quiet−skip
mode to manage the power delivery while minimizing acoustic noise.
To help ensure converter ruggedness, the NCP1340 implements
several key protective features such as internal brownout detection, a
non−dissipative Over Power Protection (OPP) for constant maximum
output power regardless of input voltage, a latched overvoltage and
NTC−ready overtemperature protection through a dedicated pin, and
line removal detection to safely discharge the X2 capacitors when the
ac line is removed.
If transient load capability is desired, the NCP1341 offers the same
performance and features with the addition of power excursion mode
(PEM).
Features
• Integrated High−Voltage Startup Circuit with Brownout Detection
• Integrated X2 Capacitor Discharge Capability
• Wide V_CC Range from 9 V to 28 V
• 28 V V_CC Overvoltage Protection
• Abnormal Overcurrent Fault Protection for Winding Short Circuit or
Saturation Detection
• Internal Temperature Shutdown
• Valley Switching Operation with Valley−Lockout for Noise−Free
Operation
• Frequency Foldback with 25 kHz Minimum Frequency Clamp for
Increased Efficiency at Light Loads
• Skip Mode with Quiet−Skip Technology for Highest Performance
During Light Loads
• Minimized Current Consumption for No Load Power Below 30 mW
• Frequency Jittering for Reduced EMI Signature
• Latching or Auto−Recovery Timer−Based Overload Protection
• Adjustable Overpower Protection (OPP)
• Fixed or Adjustable Maximum Frequency Clamp
• Fault Pin for Severe Fault Conditions, NTC Compatible for OTP
• 4 ms Soft−Start Timer
www.onsemi.com
9
1
SOIC−9 NB
D SUFFIX
CASE 751BP
8
1
SOIC−8 NB
D SUFFIX
CASE 751
MARKING DIAGRAM
9
1340xz
ALYW
G
1
1340xz = Specific Device Code
x
= A or B
z
= 1, 2 or 3
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
G
= Pb−Free Package
PIN CONNECTIONS
1
Fault
HV
FMAX
FB
VCC
ZCD/OPP
DRV
CS
GND
1
Fault
FB
ZCD/OPP
CS
(Top Views)
HV
VCC
DRV
GND
ORDERING INFORMATION
See detailed ordering and shipping information n on page 2
of this data sheet.
© Semiconductor Components Industries, LLC, 2016
1
September, 2016 − Rev. 0
Publication Order Number:
NCP1340/D